USING YOUR HAIR DRYER:
1Having shampooed your hair, ensure that it is rinsed thoroughly as shampoo that is left in the hair will leave it looking dull.
2Comb your hair through with a
3Ensure the concentrator nozzle & diffuser (diffuser only with 21036) attachment are detached.
4Move the on/off switch to position
to turn the hair dryer on.
5Use the three heat
and two speed
settings to make the dryer operate faster and hotter, to help remove excess water from your hair.
6As your hair begins to dry, switch off the hair dryer and clip on the concentrator nozzle or diffuser (diffuser only with 21036) to begin styling your hair. For a straight style, use the concentrator to direct air down into the shaft of hair.
Straight
7As you begin to style your hair during drying, move the heat and speed buttons to select a slower and cooler setting use cool shot to set the style.
Curly
8If you want to create volume instead, attach the diffuser (only with 21036) to your hair dryer. Switch off the hair dryer then push the diffuser onto the end of the hair dryer ensuring it clicks into place. Collecting hair in the diffuser as you dry will give you a textured/tousled look or will enhance natural curls.
9When your hair is dry, and you have achieved the desired style,
press the cool shot button
. This will release a burst of cold air which will set your style in place. Press the button again to return to normal styling temperature.
10Always remember to switch the on/off button to the position 0, to turn your hair dryer off.
ALWAYS CLEAN YOUR FILTER
Cleaning the air filter regularly will ensure that only clean air is used to dry your hair and that the dryer will not overheat and cut out. To remove the air filter, enure the hair dryer is unplugged from the mains supply. Hold the body of the dryer firmly while pressing in the two sides of the filter and pulling it to release. Clean away hair and lint from the filter. Ensure the filter is completely dry before refitting. To
WIRING
The product is fitted with a 13A (BS1363) plug. A 13A fuse (BS1362) must be used. Check the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be AC (Alternating Current). If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and an appropriate one fitted.
IMPORTANT: THE PLUG, REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.
MAINS LEAD
As a safety precaution, and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this can cause damage.
SAFETY INFORMATION
When using your hair dryer, basic safety precautions should always be followed. Please read these instructions carefully before using the product, and keep them in a safe place for future reference.
1Use this appliance for its intended use only.
2To protect against the risk of electric shock, do not immerse the appliance in water or in any other liquids.
3Check the voltage on the rating plate of the hair dryer corresponds with your house electricity supply which must be AC (Alternating Current).
4Always unplug the appliance when it is not in use.
5Do not leave the hairdryer switched on whilst unattended.
6WARNING (for UK only): Do not use this appliance near bathrooms, showers, basins or other vessels containing water.
WARNING: (for other European countries) For additional protection, the installation of a residual current device (RCD) having rated residual operating current not exceeding 30mA is advised in the electrical circuit supplying the bathroom. Ask your installer for advice.
7In the event of supply cord/cable damage, do not attempt to replace mains cable. It should be returned to Morphy Richards in order too avoid a hazard. When the hair dryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hair dryer is switched off.
8This appliance is not intended for use by children or other persons without assistance or supervision, if their physical, sensory or mental capabilities prevent them from using it safely. Keep out of reach of children at all times.
9Do not place on surfaces that are likely to be damaged by heat.
10 Ensure the filter is cleaned regularly.
PRODUCT FEATURES:
Stylish & Ergonomically designed
unique to Morphy Richards ensuring ease of use.
Removable air filter
for easy cleaning to maintain the dryer performance
2000w
ensuring the power but a lightweight balanced design.
3 heat, 2 speed & Cool shot setting
for versatile settings for all hair types and styles.
Deep bowl diffuser
to creating the ultimate curly styled finish, perfect for long hair. (Only with 21036)
Dimond Ionic feature
to protect and enrich, reduce the elasticity and smooth the hair to the tip, producing quicker and kinder drying to your hair.
Slim
concentrator nozzle
for controlled and easy styling
3M salon cable & hanging loop
for flexible use & convenient storage
