Morphy Richards 27005 operating instructions Clock Setting

CLOCK SETTING

Setting the clock automatically

The time and the day of the week can be set automatically when receiving on RDS station which transmits the clock time (CT) information. Please note that not every RDS station transmits the clock time information.

This information (when available) is transmitted by the RDS radio station once every minute.

The clock is set within one or two minutes, if the RDS station has enough signal strength.

• Switch on the radio with the ON/OFF button.
• Search for an RDS station.	R D S
-The Auto-time indicator flashes, indicating that the	FM
set is waiting for the time signal.
-The indicator stops flashing when the time and day	R D S
	FM
of the week is set. The quartz clock starts to run with
the received time.

•If the clock is not set after 3-4 minutes, try another RDS station.

The clock time and day of the week are updated automatically each time the radio is switched on and when you tune to an RDS station, as long as the Auto-Time function is enabled.

To enable and disable this function, the radio must be switched on. To disable the Auto time function, press the TIME SET button briefly. To enable the function again, press the TIME SET button once again.

Setting the clock time manually

•Make sure that the radio is off.

•Press the TIME SET button and hold.

•Set the clock time with the + or - buttons.

-A single press of the respective button switches to the next or preceding minute.

-If the button is held, the setting changes, rapidly (after 4 seconds, at a higher speed).

Setting the day of the week manually

•Make sure that the radio is off.

•Press and hold the SNOOZE button and set the day of the week with the +/- buttons. (in the same way as the clock time).

11