Maintenance
Do not expose your clock radio to extremes of temperature. The product should
be kept in a warm environment free from dust and damp. For external cleaning
use only a soft, clean, damp cloth. Use of detergents may damage the finish.
Technical specification
AC Power supply : 230v 50Hz
Battery back-up : 9V DC type 6LR61/PP3 (not included)
Radio : FM 88Mhz - 108MHz
: MW 530Khz - 1600kHz
Warning labels
WARNING: to reduce the risk of electric shock, do not expose this appliance
to rain or moisture.
ATTENTION: To reduce the risk of electric shock, do not
remove the cover. There are no user serviceable parts inside
the unit. Refer any servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a warning
sign alerting the user of ‘dangerous voltage’ inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
To prevent fire or shock hazard do not expose this apparatus to dripping or
splashing.
Guarantee
Morphy Richards products are manufactured to internationally accepted quality
standards. In addition to your statutory rights, Morphy Richards guarantee your
product to be free from manufacturing and component defects for a period of TWO
YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your Morphy
Richards dealer from whom the product was purchased will be pleased to replace it
free of charge.
Should your product develop a defect within the guarantee period but after the
replacement period, please return the product to the following address, together with
the proof of purchase, brief details of the symptoms and your own name and
address.
Registered address
Morphy Richards Limited
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be
repaired and returned to you promptly.
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614
Republic of Ireland 1800 409119
Replacement parts 0870 167 6645
www.morphyrichards.co.uk
AD28044M UK Rev 1

P.5 P.6

P.7

Setting the alarm time
Alarm 1
1 Press and hold the ALARM 1 button (1).
2 Press the FAST button (8) to advance the setting quickly. When nearing the
desired time, release the FAST button.
3 Press the slow button (5) to advance the setting slowly to the desired time.
4 Release the the ALARM 1 button.
5 Set the FUNCTION switch to ‘AUTO’.
Alarm 2
1 Follow the procedure above for setting alarm 1 using the alarm 2 button
instead.
Setting the alarm
1 Set the alarm time as detailed above.
2 Set the ALARM switch (16) to ALARM 1, ALARM 2 or ALARM 1 + 2 to
activate the appropriate alarm.
• In alarm 1 and 2 both settings are activated.
Wake to buzzer
1 Slide the VOLUME control / BUZZER (13) to the ‘BUZZER’ position.
• The dial will click when the buzzer position is reached.
To wake to radio
1 Slide the FUNCTION switch (14) to the ‘ON’ position.
2 Slide the BAND switch (6) to MW or FM.
3 Use the tuning control (7) to select desired station.
4 Adjust the VOLUME control (13) to the desired level.
5 Slide the FUNCTION switch (14) to the ‘AUTO’ position.
• The appropriate alarm indicator will illuminate on the led display.
Note: The alarm or radio will sound and will continue for 2 hours past the alarm
setting.
To stop the alarm
1 Press the SNOOZE button (3) to silence the alarm for approximately 7
minutes. (When pressing and holding the snooze button the clock display will
show the last digit of the minute and running second of current time.
2 Slide the FUNCTION switch (14) to the ‘OFF’ position or press the
TIME SET / ALARM OFF button (4) to cancel the alarm.
Snooze function
The alarm can be interrupted for a 7 minute period.
1 Press the SNOOZE button (3), after 7 minutes the radio or alarm buzzer will
sound again.
To set the sleep function
Your clock radio is equipped with a sleep function that will turn the radio
on and switch it off automatically after a set period of time from between
1 minute to 59 minutes.
1 Make sure the FUNCTION switch is set to ‘OFF’ or ‘AUTO’ position,
otherwise the clock radio will not turn off after the sleep period ends.
59 minute sleep timer
1 Press the sleep button (15) to have the radio play for 59 minutes, before
automatically shutting off.
Variable-length sleep timer
1 Press and hold the SLEEP button (15), 0:59 will be displayed and the timer
will count down. Release the SLEEP button when the desired sleep time is
reached.
2 Press the TIME SET / ALARM OFF (4) button to cancel the sleep function
and turn off the radio before the sleep time ends.
• The fast button will advance the sleep time quickly.
• The slow button will advance the sleep time in increments.