Morphy Richards 29006 operating instructions Location of controls, Electrical requirements

Stereo cd alarm clock radio

29006 OPERATING INSTRUCTIONS

Illustration

							30
1								29
2								28
	4
3	5					12
6					11
								27
7								15
	19							26
8
	20
24	21	22						25
16			23	9	10	13	14
17								32
31						18		24

Location of controls

1	Alarm 1 and 2 selector switch					13	Sleep button: to select sleep function
2	Alarm function selector switch						and set countdown time
3	Play/pause		button			14	Time button: to set time
4	Play mode/program button					15	Power on/off button: to turn radio,
5	REPEAT button: For continuous cd playback						cd and alarm on and off
6	MIN Skip/fast search/selection (			backward):		16	PM indicator
	-to skip cd tracks and for reverse within a track					17	Alarm 1 on indicator
	-for quick and normal setting of time and alarm clock					18	Alarm 2 on indicator
	functions. Quick selection: press and hold					19	Power indicator
	normal selection: press repeatedly					20	Program indicator
7	HOUR Skip/fast search/selection (				forward):	21	Random indicator
	-to skip cd tracks and for fast search within a track					22	Repeat indicator
	-for quick and normal setting of time and alarm clock					23	FM stereo indicator
	functions. Quick selection: press and hold,					24	Speakers
	normal selection : press repeatedly					25	Tuning indicator
8	Stop	button: to stop cd playback				26	Function selector switch
9	Snooze button: Stops alarm and repeats					27	Volume control
10	PTS button: to select your favourite cd track to wake up to					28	Cd open tab
11	Alarm 1 button: to set alarm 1					29	Earphone socket
12	Alarm 2 button: to set alarm 2					30	FM wire aerial
						31	Dial scale with pointer
						32	Battery compartment

P.2

Electrical requirements

Check the voltage on the rating plate of your clock radio corresponds with your house electricity supply which must be A.C. (alternating current).

If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.

IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.

Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse must be fitted.

Battery back-up facility (unit will work without a battery being fitted)

Your cd alarm clock radio is equipped with a battery back-up facility.

1Remove the battery compartment cover (underneath the unit) by pushing in the clip and lifting off.

2Insert a battery size 9 volts PP3/6LR61 (Ensure battery is inserted correctly).

3Replace the battery compartment cover.

Should a power interruption occur the clock will continue to run, however, time keeping will not be accurate. The display will be extinguished to conserve battery life but the memory will retain details of the clock time and alarm settings.

If the optional battery is not installed in case of the AC power failure the clock will reset to 12:00 when power is restored. You will need to reset the clock and alarm settings.

Battery back-up is designed to operate for a short period only.

If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage.

In the interests of environmental safety : dispose of batteries safely.

Setting the clock time

1While holding down the TIME button, press the or to set the desired time. The pm indicator will light up when midday has been reached.

2Release the button to save time setting.

Radio operation

FM wire aerial

To obtain the maximum FM reception fully extend the wire FM aerial (which is located at the rear of the unit) and alter the direction of the wire for best results.

The aerial for the MW waveband is located inside the unit. To obtain the maximum MW reception rotate the clock radio.

1Slide the FUNCTION SELECTOR switch to select MW or FM.

2Press the POWER on/off button.

3Adjust the VOLUME control to a suitable level.

4Slowly adjust the TUNING control to select your desired station. The FM stereo indicator will light up when FM stereo signal is received.

5To switch off the radio, press the POWER on/off button.

To play compact disc

1Press the POWER/ON OFF button, the power indicator will light up.

2Open the cd door using cd open tab, load a disc in the cd compartment. Close the cd door by pushing down until it locks into place.

3Select the cd mode by switching the function selector to cd.

4Press the play/pause button. The display will show the track number when you begin to play a cd. After a few seconds, the display reverts to the current time.

Note : The same button can be used to momentarily interrupt playback. The

track number will flash until the button is pressed again.

5Adjust the volume control until the desired level is reached.

6Press the stop button to stop playback.

7To switch off the cd press the power on/off button.

P.3 P.4