Electrical requirements | Instructions for use |
Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).
For appliances supplied with fitted plug
If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.
Note: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Should the fuse in the 13 amp plug require changing a 13A BS1362 fuse must be used.
| á |
| ß |
| Þ |
| Ý |
à | Ü |
Ú |
|
Û |
|
Features of your toaster
ÚElectronic variable browning control Û Cord storage
Ü Cancel button with neon
ÝFrozen bread button with neon
ßBread carriage lever/hi lift for small items àRemovable crumb tray
áVariable width bread slots
Please read before use, taking careful note of points 1 to 3
1Before plugging in ensure that the carriage lever ß is positioned as the above diagram.
2Use your toaster once without bread. This will
3Select the desired level of
browning on the browning control Ú marked 1 to 8. The
setting will vary according to the moisture content and thickness of bread. For best results ensure
that the bread slices are of even thickness, freshness and size.
However, the variable width bread slots will accept thicker or thinner bread than a conventional toaster. Remember that stale bread toasts more rapidly than fresh and thin bread toasts quicker than thick. See additional points for more information.
4After selecting the desired level, place your bread in the slots and depress the bread carriage lever ß downwards until it locks.
Note: The bread carriage lever will not stay down unless the toaster is plugged in and wall switch is on.
5After the desired degree of brownness has been reached the bread will
•If the first slices are not dark enough turn the browning control to a higher setting.
•If the bread in your toaster becomes jammed disconnect your toaster at the socket, allow it to cool, then remove the bread.
•When not in use, switch your toaster off at the mains and remove the plug from the socket. DO NOT WRAP THE CABLE AROUND THE MAIN BODY OF THE APPLIANCE DURING OR AFTER USE.
Using the cancel setting O
When the bread carriage lever is depressed, the cancel button Ü will illuminate. If you wish to interrupt the toasting process, press the cancel button.
Using the frozen bread button X
To toast frozen bread, do not adjust the browning control, place the bread normally in the bread slots, depress the bread carriage lever and press the frozen bread button Ý. The button will illuminate and the toaster will automatically toast for an extended period.
3