40704 rev2 30/7/08 16:04 Page 4
fi fl ‡ ·
›
‹ | ‚ |
| |
¤ | „ |
| |
⁄ |
|
| ‰ |
|
|
|
| BEFORE USE | |
|
|
|
| ||
 |
|
| Sort out the items to be | ||
|
| ironed according to the | |||
|
|
|
| type of fabric. This will | |
|
|
|
| minimise the frequency of | |
|
|
|
| temperature adjustment for | |
|
|
|
| different garments. | |
|
|
|
| Note: The steam facility | |
|
|
|
| should only be used on | |
|
|
|
| garments which are | |
|
|
|
| suitable for ironing at the 2 | |
| COMPONENTS |
|
| and 3 dot settings. | |
|
|
|
| ||
| OF YOUR IRON |
|
| When ironing with the | |
|
|
|
| steam facility at the 2 dot | |
⁄ Soleplate | |||||
|
| setting, the steam output | |||
¤ Spray nozzle |
|
| should be set at the lower | ||
|
| end of the steam range | |||
‹ Filling hole with cap |
|
| (see the ‘Variable steam’ | ||
|
| section on page 5). | |||
› Variable steam switch |
|
| Textiles and clothes are | ||
fi Shot of steam button |
|
| supposed to carry ironing | ||
|
| instructions. If they don’t, | |||
fl Spray button |
|
| you should follow the | ||
|
| fabric guide on page 3, but | |||
‡ Auto |
|
| be sure to test the | ||
|
| temperature by ironing the | |||
| (certain models only) |
|
| hem of the garment or | |
· Temperature indicator light |
|
| similar area first. | ||
|
| If you turn the control dial | |||
| (red) |
|
| ||
‚ Life long |
|
| ‰ down from a hot setting | ||
|
| to a cooler setting, wait | |||
| (certain models only) |
|
| until the iron temperature | |
„ Water tank (illuminated on |
|
| has stabilised before you | ||
|
| continue ironing. | |||
| certain models) |
|
| Delicate fabrics such as | |
‰ Temperature control dial |
|
| |||
|
| silk, wool, velour, etc, are | |||
| with indicator |
|
| best ironed with an ironing | |
 Graduated filling beaker |
|
| cloth to prevent shine | ||
|
| marks. | |||
FILLING
1Make sure that the iron is not plugged in, then set the variable steam control › to the ‘0’ position before filling the iron with water.
2Lift up the filler cap ‹ and pour water through the hole into the water tank „, using the beaker provided  A.
A
After filling, replace the fill cap. In hard water areas, the use of distilled or demineralised water is recommended.
WARNING: Never use battery topping up fluid or water containing any substances like starch, or sugar, or defrosted water from a refrigerator.
3Always pour out the remaining water after use.
WARNING: When filling your iron with tap water, always use the beaker provided. Never fill directly under the tap.
Tank capacity
•Models 40704 / 40709 /
40732 / 40733: Advise 400ml
•Model 40734: Advise 350ml
|
|
4 | UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 |
