48951 Rev1 23/5/06 11:23 Page 5

ASSEMBLY

1Place juice collector on top of the motor base aligning the

spout with the corresponding cut out in the base A.

2Place the mesh filter basket inside, pushing down to make

sure it clicks firmly into place

B.

3Place the juicer cover on top ensuring that the juice cover spout and outlet for the juice collector are aligned.

4Lift the locking arm up and lock

into place on top of the juicer cover C.

NOTE: The juice extractor will

not work if the locking arm is not correctly in place C.

IMPORTANT: Do not pick up the juice extractor using the locking arm.

5Tilt the pulp container slightly to fit under the juice cover D.

6Put the juice container under the spout ensuring the froth guard is fitted correctly.

7Place the large food pushers into the food shoot and the small food pusher can be locked into place by rotating.

 

JUICING

 

A

1 Plug the juicer into the

 

 

 

 

 

 

 

 

 

 

 

electrical socket.

 

 

 

 

 

 

 

 

 

 

 

2 Ensure that both the juice

 

 

 

 

 

 

container, pulp container and

 

 

 

 

 

 

froth-guard are in place.

 

 

 

 

 

3 Most fruit and vegetables can

 

 

 

 

 

 

be put into the Juice Extractor

 

 

 

 

 

 

with the peel in place. Ensure

 

 

 

 

 

 

 

 

 

 

 

 

the fruit or vegetables are

 

 

 

 

 

 

 

B

 

thoroughly washed, to remove

 

 

 

 

 

 

 

 

 

 

 

 

any dirt or chemicals, if you are

 

 

 

 

 

 

 

 

 

 

 

 

concerned with the quality of

 

 

 

 

 

 

the peel, remove it first.

 

 

 

 

 

 

Remember what you put into

 

 

 

 

 

 

the Juicer, you will get out as

 

 

 

 

 

 

juice.

 

 

 

 

 

Citrus peel (eg. oranges, lemons) and thick fruit peel (eg.

 

pineapple, bananas) must be

 

 

 

C

 

removed first.

 

 

Stones or large pips will have

 

 

 

to be removed before juicing.

 

 

 

Pips from apples and oranges

 

 

 

are acceptable, anything larger

 

 

 

or harder will need to be

 

 

 

removed.

 

 

Cut into suitable size pieces to

 

 

 

fit into the fruit shoot. Usually

 

 

 

apples need only to be cut in

D

4

half.

 

 

Switch to the appropriate

 

 

 

speed, as indicated in the

 

 

5

Speed Selector table.

 

 

If juicing larger pieces, use the

 

 

 

large food pusher (with the

 

 

 

small pusher locked in place)

 

 

 

 

 

 

apply gentle force, to press the

E

 

fruit down E.

 

 

 

 

 

 

For juicing small pieces ie

 

 

 

 

 

 

grapes, or carrots, unlock the

 

 

 

small pusher (by rotating), place

 

 

 

the large pusher in the fruit

 

 

 

shoot, and feed the

 

 

 

fruit/vegetables through the

 

 

 

hole in the large pusher, apply

 

 

 

gentle force to press the fruit

 

 

 

down F.

F

 

Using the correct size pusher

 

 

 

for the size of pieces being

 

 

 

juiced is essential to prevent

 

 

 

splashing and efficient juice

 

 

 

yield.

 

 

6

With the motor running place

 

 

 

food into the fruit shoot.

 

 

 

 

 

 

WARNING: Always use

 

 

 

the food pusher to push

 

 

 

fruit into the feed tube.

 

 

 

Never use utensils or

 

 

 

your fingers to push fruit

 

 

www.morphyrichards.com

5

Page 5
Image 5
Morphy Richards 48951 manual Assembly, Juicing