8
Setting the timer1Move the slider to timer position.
2The start and timer symbols will
appear plus the hour will flash.
Use the up and down buttons to
select the required start time
ensuring its on the correct AM
or PM. When desired hour is
selected press mode button F.
3Then the minutes will start to
flash, select the desired start
time (this setting adjusts in 15
minute steps) When selected
press mode button.
4Timer and finish will appear. plus
the hour will flash. Use the up
button to select required finish
time ensuring its on correct AM
or PM. When correct hour is
selected press mode.Then the
minutes will start to flash, select
required time. Then press mode
button (this setting adjusts in 15
minute steps) G.
5The heat level will start to flash
use the up and down arrows to
select required heat level. Press
mode button. The pre-heat
symbol will flash. If this is
required, then press mode
button (if not required then press
down arrow button before the
mode button)
NOTE: The pre-heat feature will
pre-heat the bed at high level (H)
for the first 30 minutes of
programed time before reverting
to the selected heat level H.
The clock symbol will then
appear indicating that the timer
function is set.
6Once the timer function is set.
The programme details are
stored in memory.
If left in timer mode the blanket
will automatically switch On and
OFF at the set time each day.
7The programmed time is stored
even when switch is moved to
the OFF position.
To use stored programme simply
move slide switch to timer
position.
8To change the programme move
slide to timer position and press
mode button and repeat steps
1-5.
Safety featuresButton lock featurePress mode then boost to lock
the buttons. To unlock press
mode then boost. This will
prevent accidental operation
while asleep. When the lock is
activated. The LOCK symbol will
appear on the LCD screen I.
F
G
H
I
UK Helpline 0870 060 2614 Ireland Helpline 1800 409119
75263 rev1 9/3/07 09:04 Page 9