Morphy Richards Bagless Vacuum Cleaner manual Emptying, Using & cleaning turbo nozzle, Ì Ïô Ó

VC73360MUK-CyclonicBaglessRev3 3/11/05 4:41 pm Page 5

and tools.

•Never over extend the hose such that the cleaner is pulled over.

IMPORTANT: Turning the cleaner sideways

helps prevent the cleaner being pulled along by the stretch hose.

Using & cleaning turbo nozzle

(Certain models only)

Attach the turbo nozzle to the hose end connector Í for use on upholstery and stairs. After use your turbo nozzle may become clogged. Turn over the nozzle and pull away

any hairs or fibres. If they are tightly wound around the brush carefully snip the fibres with scissors, being careful not to damage the brush bar, pull away from the brush bar and dispose.

Emptying

Empty the dust canister regularly even if it does not look full this will maintain the performance.

1Remove the front cover by lifting the cover release lever ¤ E.

2Lift-up the dust canister release Î and pull the canister away from the main body.

3Take the canister to the dustbin.

4Turn the lid 1/4 turn anti-clockwise to unlock, lift off the lid with pleated filter, Ì put to one side. F

5Lift out the central mesh filter Ô from the dust canister Ó G. Brush clean if necessary.

6Empty out the dust canister Ó.

7Re-fit the central mesh filter.

8Shake the pleated filter to remove all dust.

9Re-fit pleated filter with lid into the dust canister by lining up the two arrows and turning the lid 1/4 turn clockwise to lock.

E

Î

¤

‹ 

F

Ì

ÏÔ

Ó

G

5