47087 rev3_Layout 1 10/06/2011 09:55 Page 4
To pre-set a brewing time
1 | 2 |
Follow ‘Using your coffee maker’ steps | Press the Programme Button (12). |
page 3. |
|
3 | 4 |
Select the brewing start time using the Hour
(13)and Minute (14) Buttons.
Keep warm
After the brewing cycle has finished, your coffee maker will switch to the keep warm mode for 2 hours.
The lights on the Display will switch off when the keep warm cycle has finished.
To switch the keep warm mode off press the On/Off Button (16).
Cleaning your coffee maker
•Unplug the coffee maker and allow to cool.
•Do not immerse the coffee maker in liquid.
•Rinse the Water Reservoir occasionally with cold water. Do not use a cloth as any residue or lint may be left behind to clog the coffee maker.
•Remove the Permanent Filter, discard any used coffee and wash. Extended soaking helps to remove coffee stains from the mesh.
4
When you have selected the desired time press the Auto Button (11), a white light will illuminate. To Cancel, press the Auto Button
(11)again.
•Wash the Glass Jug, Jug Lid, and Filter Holder in warm soapy water. Rinse and dry all parts thoroughly. Refit the Filter and Filter Holder.
•Wipe all external surfaces, including the warming plate, with a damp cloth and dry thoroughly.
•Care must be taken to ensure that the
•Never use harsh or abrasive cleaners.
•NO parts are suitable for cleaning in a dishwasher.
