Morphy Richards contemporary manual Using your re-heatbutton, Using the cancel setting

4After the set time has been reached the bread will pop-up automatically ready for removal from the slots. The bread carriage lever will have returned to its upper position and the heating element will have switched

off.

•If the bread in your toaster becomes jammed disconnect your toaster at the socket, allow it to cool, then remove the bread.

•When not in use, switch your toaster off at the mains and remove the plug from the socket. DO NOT WRAP THE CABLE AROUND THE MAIN BODY OF THE APPLIANCE DURING OR AFTER USE.

Using your re-heat button

If your toast has popped up and gone cold, the toaster offers a re-heat facility. To use, depress the bread carriage lever and press the re-heat button immediately . The button will illuminate and the toaster will operate for a short period, re-heating the bread.

Using the cancel setting

If you wish to interrupt the toasting process, press the cancel button .

Using the frozen bread button

To toast frozen bread, do not adjust the browning control, place the bread normally in the bread slots, depress the bread carriage lever and press the frozen bread button . The button will illuminate and the toaster will automatically toast for an extended period.

2 / 4 slice selection switch 2 4

On the four slice model there is the option to turn-off the heating elements in two of the bread slots when only two slices of toast are required.

Switch this switch between the 2 slice and 4 slice setting. When the toaster is in the 2-slice setting only the two left-hand bread slots will toast.

Using the bun warmer

Clip the bun rack (for 4 slice clip the bun racks) onto the slots on top of the toaster, ensuring it is securely placed. Set the browning control to between 1 and 3. Depress the bread carriage lever until it holds down. Wait for the toaster to switch off automatically or press the cancel button to switch

the toaster off before remov- ing the buns.

Take care not to touch the metal bun rack as this will be hot.

Additional points

•In order to achieve uniform browning, we recommend you wait a minimum of 30 seconds between each toasting, so that the control can automatically be reset.

•If toasting one slice only, you may need to adjust the browning control to a slightly lower setting.

4