Morphy Richards Cordless stainless steel kettle Features of your kettle, Instructions for use

Ú

Û

ä

Ü

Ý

ãFeatures of your kettle

ÚFlip top locking lid

âÛLimescale spout filter ÜConcealed element

áÝCordless 360° base unit ÞCord storage

ßNeon on light

àOn/off switch (lift up to switch on, press down to switch off)

áWater level gauge âCool touch handle

àãLid release button

ßäInternal and external MAX marks

Instructions for use

Þ

Electrical requirements

Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).

Mains lead length

The correct length of lead should reach from the socket to the base unit without straining the connections. Reduce the length of the lead by storing the excess on the cord storage facility in the base unit. Do not allow a loop of lead to lie on or hang over the edge of the work surface.

For appliances supplied with fitted plug

If the socket outlets in your home are not

suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.

Note: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet.

WARNING: THIS APPLIANCE MUST BE EARTHED.

1To fill the kettle press the release button ã to open the flip top lid.

2Put in at least enough water to cover the bottom of the kettle but never more than the maximum (MAX).

3To close the lid, press the rear of the lid until

it clicks.

Do not operate the kettle with the lid open or removed. Do not operate without the spout filter in position.

4Place kettle on the base unit, engaging the 360° base unit connector. The rotary type base unit allows you to place the kettle in any convenient position.

5Plug in and switch on at the wall socket.

6Lift the switch lever à to switch on. The neon ON light will illuminate indicating that the kettle is working.

7When the water boils, the kettle will switch off automatically.

If the kettle is lifted off its base, it will automatically switch off.

8To remove the kettle from the base unit, grasp the handle and hold the kettle level

while lifting it clear of the base unit. Take extra care if the kettle is filled to MAX.

•If you are using the kettle for the first time, pour away the boiled water and refill.

•To re-boil, switch to ON again. If the kettle has just switched off wait a minute or so before switching if back on again.

If you do not put in enough water, or switch

on the kettle when it is empty, the safety cut-out will switch off the power automatically. If this happens, wait a few minutes for the element to cool, then refill and use as normal.

3