DF45075M Rev 1 20/12/04 11:15 AM Page 5
Basket operation
The handles are removable so they can be attached to the 2 small or 1 large basket.
Location of basket to drain
With the lid open and in the vertical
position, the basket can be raised into the
rest draining position or removed completely.
When in the draining position the basket should be hooked on the basket rest lip (shown by the arrow). When lowering the basket back, lift up to remove from the basket rest position, push forward slightly and lower down. Press the basket release button and allow the handle to lower.
When using the large single basket both basket release buttons must be pressed to allow the basket to lower into the oil.
Assembly/Disassembly sequence
The fryer has to be disassembled and assembled following this procedure.
•Open the lid and remove.
•Remove the basket.
•Lift out the tank.
•Pull out the pod control.
Assembly is the reverse of the above process.
Removal of the pod
1Lift up the fryer body at the front as shown and pull out the pod.
2Replace by locating the pod in the
guides and push fully in.
3Once the pod is in place route the mains cable to the side or out of the back, whichever is convenient.
Replacing the bowl
Ensure bowl contacts are dry before replacing.
5
