43941_x 30/11/2010 10:57 Page 5
| BEFORE FIRST | • To | For stainless steel kettles |
| USE | again. If the appliance has | please follow the |
|
| just switched off wait a | instructions carefully. |
| Before using the appliance | minute or so before |
|
| for the first time, fill with | switching it back on again. | Alternatively use citric acid |
| water, boil and pour away. |
| crystals (available from |
|
| • If you do not put in enough | most pharmacies) as |
| OPERATING THE | water, or switch on the | follows: |
| appliance when it is empty, | 1 Fill the appliance 3/4 full, | |
| APPLIANCE | the safety | |
|
| switch off the power | boil, then unplug the |
|
| ||
1 Wherever possible fill | automatically. If this | appliance (remove the | |
| through the spout, as this | happens, refill and wait a | cordless kettle from the |
| helps to free the filter from | few minutes for the element | base unit) and stand it in an |
| limescale | to cool, then use as | empty sink or bowl. |
|
| normal. |
|
•The water level indicators allow you to easily see the amount of water in the kettle.
•Always ensure that the appliance is filled till the water in the kettle is filled to at least the minimum level shown on the water gauge.
•Boil only as much water as you need as this saves electricity.
2Place the appliance on the base unit, ensuring the appliance locates on to the 360° connector.
•Due to the oval shape of this product we recommend alining the kettle with the power base for better stability
3Plug in and switch on at the wall socket.
4Switch the appliance on. The water level indicator will light up.
5When the water boils the appliance will switch off automatically.
•If you are using the appliance for the first time, pour away the boiled water.
6Lift the appliance from the base unit by the handle ensuring you hold the appliance level.
|
|
| 2 Gradually add 50gm of | |
| Filter removal |
|
| citric acid crystals to the |
|
|
| water, then leave the kettle | |
|
|
|
| to stand. Do not use a |
1 Open the lid. |
|
| more concentrated | |
2 Lift the filter upwards from |
|
| solution. | |
|
|
| ||
| its location using the tab |
| 3 As soon as the | |
| provided. |
|
| effervescence subsides, |
|
|
|
| empty the appliance and |
3 To refit the filter, slot it into |
|
| rinse it thoroughly with cold | |
| the side wall guides and |
|
| water. |
| press down firmly. Ensure |
|
|
|
| the filter is correctly located |
| 4 Wipe the outside of the | |
| into the central guide. |
|
| appliance thoroughly with a |
|
|
|
| damp cloth to remove all |
| WARNING: Make sure |
|
| traces of acid which may |
| that the filter is put in |
|
| damage the finish. |
| correctly otherwise the |
|
| IMPORTANT: Ensure that |
| lid will not close. |
|
| |
|
|
|
| the electrical connections |
| Descaling |
|
| are completely dry before |
|
|
| using the appliance. | |
| IMPORTANT: As this |
|
| HINTS AND TIPS |
| appliance is fitted with a |
|
| |
| concealed element it must |
|
|
|
| be descaled regularly. The |
|
| Cleaning and |
|
|
| ||
| frequency of descaling |
|
| maintenance |
| depends on usage and the |
|
| |
| hardness of the water in |
|
| WARNING: Always |
| your area. |
|
| disconnect the plug |
| Excessive scale can cause |
|
| from the mains and |
|
|
| allow the appliance to | |
| the appliance to switch off |
|
| cool before cleaning. |
| before boiling and may |
|
|
|
| damage the element |
|
| Wipe the outside with a |
| invalidating the warranty. |
|
| damp cloth. |
| It is essential that regular |
|
| IMPORTANT: Do not use |
| descaling takes place. |
|
| abrasive cleaners on the |
|
|
|
| outside of the appliance |
| Remove hard scale using a |
|
| which may scratch the |
| proprietary descaling |
|
| surface. |
| product suitable for |
|
|
|
| stainless steel, glass or |
|
|
|
| plastic. |
|
|
|
3For details of other Morphy Richards products, please see our website: 
