Morphy Richards RN42221MUK Rev3 Emptying and storing, Contact us, To clean a coated soleplate

RN42221MUK Rev3_IB 22/08/2012 10:57 Page 7

3Hold the base unit (9) firmly with both hands and shake well.

4Turn the base unit (9) upside-down and pull back the boiler cap (14). Unscrew the boiler screw (13) with the boiler key (12), which is attached to the underside of the base unit. A suitable screwdriver or socket can also be used.

5Hold the base unit (9) over the sink, turn the unit the correct way up to empty all water and loose scale from the boiler into the sink.

6Using clean water, refill and empty the boiler repeatedly until all scale has been rinsed out.

7Replace the boiler screw, ensuring it is tightened fully. Replace the boiler cap, boiler key, water tank and iron to the base unit.

WARNING: Ensure the boiler is empty before replacing the boiler screw (13).

8 The descaling indicator light (18) will extinguish the next time you use the product. Please wait for up to one minute whilst it pumps water and registers that the boiler has been cleaned.

To clean a coated soleplate

Do not use scouring powder or solution as this could cause damage to the coating.

If any man-made fibres fuse to the soleplate (3), set the iron at the MAX position and pass it over a clean piece of cotton to draw the deposit off the surface.

To clean the exterior

Allow the unit to cool and wipe over with a damp cloth and mild detergent, then wipe dry.

Emptying and storing

Allow the appliance to cool. Empty the water from the water tank (7) by removing it from the base unit (9) and opening the filling cap (6). Once the water tank is empty, re-attach it to the base unit.

If the steam generator is not going to be used for a long time, also empty the boiler as instructed (see ‘Cleaning the boiler’).

To store, pull the cord clamp (11) outwards. Wrap the power cord (23) and steam supply cord (22) around the base unit in the cord storage groove (10). Secure the cord in place with the cord clamp (11). Avoid kinking of cables, particularly at the exit from the base unit.

Contact us

Helpline

If you are having a problem with your appliance, please call our Helpline, as we are more likely to be able to help than the store you purchased the item from. Please have the product name, model number and serial number to hand when you call to help us deal with your enquiry quicker.

UK Helpline: 0844 871 0960

IRE Helpline: 1800 409 119

Spares: 0844 873 0726

Talk To Us

If you have any questions or comments, or want some great tips to help you get the most out of your products, join us online:

Blog: www.morphyrichards.co.uk/blog

Facebook: www.facebook.com/morphyrichardsuk

Twitter: @loveyourmorphy

Website: www.morphyrichards.com

PLEASE BE AWARE

OF HOT SURFACES

HANDLE WITH CARE

Treating scalds

•Run cold water over the affected area immediately.

•Do not stop to remove clothing.

•Seek medical advice quickly.

7