Job: 40715 Rev 1
Shot of steam
Press the shot of steam button ¤ to obtain a burst of extra steam for ironing out
creases in heavy material such as denim etc.
The shot of steam can be
used whilst dry ironing, providing there is water in the tank, and the temperature control is set within the steam range.
Do not use shot of steam at temperatures below the steam range shown on the control dial.
Note: For optimum steam quality, do not operate the shot more than three times in succession.
No drip system
Your iron is fitted with a no drip system which is designed to prevent water escaping from the soleplate when the iron is too cold.
During use, the no drip system may emit a loud click, particularly during
Auto shut-off
Your iron is fitted with the auto
Electrical requirements
Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating current).
If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.
WARNING : The plug removed from the mains lead, if severed, must be destroyed as a plug with a bared flexible cord is hazardous if engaged into a live socket outlet.
Should the fuse in the 13 amp plug require changing a 13 amp BS1362 fuse must be fitted.
WARNING: This appliance must be earthed.
Vertical steam
Hold the iron in a vertical position between 1cm and 2cm away from the item D. Press the shot of steam button ¤, this will create vertical steam. This feature is especially useful for removing creases from hanging clothes, curtains, wall hangings, etc.
Note; For optimum steam quality, do not operate the shot more than three times in succession.
D
If the iron is left unattended in the horizontal position it will shut down after 30 seconds.
If it is left in the vertical position it will shut down after 8 minutes.
To reactivate the iron gently shake it and wait for the iron to
Life long anti-scale system
The life long
Instructions for use
Temperature guide
Heat setting markings on the function console panel of your Morphy Richards irons match those of the International Textile Care Labelling Code.
Symbol |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (120˚C Max) Cool |
| (160˚C Max) Warm | (210˚C Max) Hot | ||||||||||||
Control knob | Do not |
|
|
|
|
|
|
|
|
|
|
|
| |||
positions | iron at all |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fabric | Nylon, Acetates |
|
| Wool, Polyester | Cotton, Linen | |||||||||||
| e.g. Acrilan |
|
| mixtures e.g. | Rayon, Rayon | |||||||||||
| Courtelle, Orlon |
|
| Polyester/Cotton | mixtures, | |||||||||||
| Triacetates, e.g. |
|
|
|
|
| e.g. Rayon/Linen | |||||||||
| Tricel/Polyester |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ironing | Iron on wrong side |
|
|
|
|
| Fabrics requiring this | |||||||||
| if moisture required |
|
|
|
|
| setting usually require | |||||||||
| use damp cloth |
|
|
|
|
| steam pressing for heavy | |||||||||
| (Not Acetate) |
|
|
|
|
| cotton, denim etc. | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With water in tank |
|
|
| Dry and spray |
|
|
|
| Steam/spray/shot of steam |
|
|
| ||||
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
| Jet clean |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Without water in tank |
|
|
|
| Dry ironing |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 | 3 |
