Morphy Richards VC73240 manual Filters, Dust canister screen filter, Pre motor filter

VC73240MUK Rev1_Instruction Booklet 09/02/2011 16:39 Page 5

FILTERS

IMPORTANT: Do not use any detergents or boiling water to wash the filters.

IMPORTANT: Never use the vacuum cleaner unless the filters are fitted. Never use the vacuum cleaner with wet or damp filters installed.

Dust canister screen filter

The dust canister screen filter ‹ should be cleaned every time the dust canister is emptied.

1Follow steps 1-4of ‘Emptying the Dust Canister’.

2Rotate the lid of the dust canister

anti-clockwise and lift away from the canister

G.

1This filter is located behind the dust canister ¤. To access the filter, remove the dust canister (follow steps 1-2of ‘Emptying the dust canister’, page 4).

2To access the pre-motor filter, lift the filter cover release tab I1 and lift off the filter cover I2.

I1 I2

2Lift out the filter by pulling the tab towards you J.

G

J

3Using a soft brush and a damp cloth, wipe

the dust canister filter and the dust canister clean H.

H

IMPORTANT: Ensure screen filter is thoroughly dry before re-fitting into the dust canister.

4Re-attach the lid to the dust canister and re-attach the assembly to the main unit.

Pre motor filter

The motor filter should be checked and, if necessary, cleaned every time the dust canister is emptied.

3Remove the foam filter from its housing K.

K

4Tap the filter clean over a dust bin to remove the dust and dirt.

To thoroughly clean, rinse the filter in warm water but the filter must be thoroughly dry before re-use. Allow to air dry for 24 hours before replacing.

5Return the pre-motor filter to its housing and replace back into the vacuum cleaner, ensuring the pre-motor filter cover and dust canister are securely in place.

For details of other Morphy Richards products, please see our website: 5