SCAN
DELETING A NUISANCE CHANNEL
Note: Your dealer must have preprogrammed a button to Nuisance Delete to access this feature.
If a channel continually generates unwanted calls or noise (a “nuisance” channel), you can temporarily remove it from the scan list:
1While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone.
2Release the Nuisance Channel Delete button. The nuisance channel is deleted.
Note: You cannot delete a priority channel or last remaining channel in the scan list.
Restoring Channels to the Scan List
1Press the Scan button to stop the scan.
2Press the Scan button again to start scanning again. The Deleted Nuisance Channels are restored to the scan list.
22
English
