Reporter Set Motorola 2700 portable version
technical data: |
|
|
|
|
|
microphone in: | impedance | - | 200 ohm |
| |
| sensitivity | - variable from 0,5mV – 5mV | |||
headphone out: | impedance(recommended) | - | 300 Ohm |
| |
|
| volume | - | adjustable | |
| amplifier capacity | - | 10 mW |
| |
tape in: | impedance | - | 50 KOhm |
| |
| sensitivity | - | variable from 100mV - 1V | ||
power consumption: |
| - | stand by appro. 300 mA | ||
|
|
| max. 1500 mA | ||
dimensions: | length | - | 250 mm |
| |
| breadth | - | 95 mm |
| |
| height | - | 200 mm |
| |
| weight: | - appr. 3,6 kg (incl. battery, | |||
|
|
| bag, telephone and handset) |
All audio in- and outputs are balanced and groundfree.
The seizure of the audio connectors is conform to the ARD specification no.:
5 pol. female XLR audio connector (both connectors parallel)
Pin 1 - shield
Pin 2 - microphone Pin 3 - microphone Pin 4 - headphone Pin 5 - headphone
3 pol. female XLR audio connector (aux in)
Pin 1 - shield
Pin 2 - LF (voice frequency signal) Pin 3 - LF (voice frequency signal)
* NOTICE !
*The Reporter Set operates with radio signals which might be subject to interference
*to persons and equipment.
*It is recommended to use the interface with an external antenna outside of the
*building for avoidance of interferences to other electronic equipment.
portable broadcast unit manual V 1.0 | 4 |