Start Here > > >
HT820
Bluetooth®
Stereo Headphones
USE THE HT820
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
You can use your HT820 headphones simultaneously with a Bluetooth A2DP enabled audio device and your Bluetooth cell phones!
Listen to music, hear a beep, and transfer to take the call on the headphones. Hang up the call with a push of a button and your music automically continues playing.
HT820
Any Bluetooth
Enabled Audio
Device* o
| Bluetooth |
| Enabled |
Ready to make it work? | Phone |
-Charge your Headphones for 2 Hours (CHARGE)
-Pair headphones & audio device (PAIR)
-Pair phone & headphones (back side of this guide)
-Listen to music and take calls!
*The Bluetooth Enabled Audio Device must be A2DP compatible
1 CHARGE
Your Headphones' Battery
Before using your HT820 for the first time, charge the headphones for 2 hours:
Insert Charger
ChargerHere
Music Button
Indicator
Light
(Right Side)
1Plug the Motorola charger into the headphones. The indicator light turns on when the battery is charging. When the headphones' battery is fully charged, the indicator light turns off.
2Disconnect the charger.
Note: Headphones do not function while charging.
You can also use a Motorola Original™ Vehicle Power Adapter to charge your headphones while in your vehicle.
A fully charged battery provides approximately: 14 hrs of music listening, 17 hrs of talk time, or 500 hrs of standby time.
2 PAIR
Before you can use your headphones with a Bluetooth enabled product, you must pair it with that product. To pair:
1Make sure your headphones are turned off (see Turning On and Off ) and press and hold the left side Call m button for 6 seconds until the indicator light turns on and remains steadily lit.
Call Button with
Indicator Light
(Left Side)
2Next, put your Bluetooth Enabled audio device in pairing mode so the devices can "talk" to each other.
For details about putting Bluetooth Enabled devices in pairing mode, refer to the device's User's Guide for directions.
Note: To pair the headphones with your phone, see "Pair with your Phone," on the reverse side of this guide.
3 | TEST AND USE |
Your Headphones & Audio Device |
Your headphones are successfully paired with a device and ready to use when the blue indicator lights changes from steadily lit, flashes rapidly, and then slowly flashes.
To confirm they are operating properly:
1Place the headphones on your head. See Wear the Headphones in this guide.
2Start playing music on the audio device. If your headphones are successfully paired, you will hear music in the headphones.
Note: You may need to wait several seconds before hearing music in the headphones while the devices connect.
See Music Controls for information about using the HT820 volume and playback controls.
After successfully pairing, you do not need to repeat these initial setup steps each time you use the headphones. Just power on both devices and they automatically connect.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196 USA
www.hellomoto.com
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005.
TURN ON AND OFF
To turn your headphones on, press and hold
the left side Call m button until the indicator light flashes 3 times (about 3 seconds). Then, release the button.
To turn your headphones off, press and hold
the left side Call m button until the indicator light flashes rapidly and then turns off (about 3 seconds).
To conserve battery power, turn off the headphones when you will not be using it.
WEAR THE HEADPHONES
Your headphones are designed to be worn comfortably with the neck band positioned behind your head.
The microphone is located in the right
CONNECT SIMULTANEOUSLY
Simultaneous connect your headphones with a music device AND your phone!
Pair the headphones to the music device (PAIR). Then pair the headset with your phone (backside of guide). Power your headphones off and then back on. After a few moments it will connect with both the music device and phone.
Any Bluetooth
Enabled Audio
Device* o
Bluetooth
Enabled
Phone
Note: The remote control functions only work when the headphones are directly connected to source device. via Bluetooth.
MUSIC CONTROLS
Left Side
| Volume |
| Buttons |
Call Button | Right Side |
Indicator |
Skip Reverse
Skip Forward
Headphone | Music Button |
Jack |
To adjust the volume, press the + or
-buttons on the left side of your headphones.
To Skip Back to the previous song: Press
the Skip Reverse Button < on the right side of your headset.
To Skip forward to the next song: Press the
Skip Forward Button >
To Play, Pause, or Stop music: Press the
Music Button M to play, pause, or stop the music.
To connect
TROUBLESHOOTING
Are you having sound interruption or connection issues?
Bluetooth as a wireless technology could be subject to interference of other wireless traffic existing in your environment. Try turning your headphone off and back on. This automatically resets the connection.
If you experience audio interruptions while the headphone is connected to both music source and a Bluetooth phone, disconnecting the phone will eliminate the audio interruptions.
Support.
If you need more help, contact us at
Support.
