Motorola 6881021B30-C manual Setting the Clock and the Date, Turning Your Pager on and OFF

ö Automatic turn on/off feature activated SETTING THE CLOCK AND THE DATE

óLow-battery indicator

e	Errored data indicator	➊ Press U until SET TIME ? is displayed.
TURNING YOUR PAGER ON AND OFF		➋ Press Q. The hour digits begin to flash.
To turn your pager on:
Press W . An alert indicator in the upper left-hand
corner indicates that the pager is on and ready to
receive messages.		Example of Set Time screen
When the pager is on and no activity is taking
		➌ Press U repeatedly to set the correct hour
place, the standby screen is displayed as shown
		digits.
below.
		➍ Press Q. The minute digits begin to flash.
		➎ Press U repeatedly to set the correct minutes.
		➏ Press Q. The A.M./P.M. field begins to flash.
		➐ Repeat Steps 5 and 6 to set your pager for
	Example of Standby screen (pager on)	A.M./P.M., 12/24 hour, and the date.
		➑ Press W or allow the pager to automatically re-
To turn your pager off:		turn to the standby screen. The time and the
➊ Press U until TURN PAGER OFF ? is displayed.		date are displayed.
		NOTES: When adjusting any of the time and date
➋ Press Q.
		fields, press and holdU to fast-forward to your
The time of day and the date are still displayed on
		selection. To skip a field, pressQ repeatedly until
your pager even when it is off.
		you get to the desired field. For example, if you
		only need to change the date, press U until SET
		TIME ? is displayed. Then press Q repeatedly un-
		til the date digits begin to flash.

Example of Standby screen (pager off)

3 4

SETTING THE INCOMING MESSAGE ALERT	READ MODE
You can set your pager to alert with either an audi-	This feature allows you to choose the most com-
	fortable way to view messages.
ble (pleasing alert), a vibrate (vibration with no
	➊ Press U until SET READ MODE ? is displayed.
beep tone), or a chirp alert (short beep tone).
➊ Press U until SET ALERT MODE ? is displayed.	➋ Press Q.
➋ Press Q.	➌ Press U repeatedly until your choice of LINE
➌ Press U until your choice is displayed.	BY LINE, SCROLL 1, SCROLL 2, or SCROLL 3 is
➍ Press Q or W. The alert mode indicator is dis-	displayed.
	In the LINE BY LINE mode, each screen of a
played in the upper left-hand corner of the
	message is displayed for two seconds.
screen.
The choices are either AUDIBLE (S), CHIRP (D), or	In the SCROLL mode, messages automatically
	scroll across the screen until the entire mes-
VIBRATOR ([) which is silent.
SETTING YOUR PAGER’S PLEASING ALERTS	sage is displayed. SCROLL 1 (slow), SCROLL 2
	(medium), and SCROLL 3 (fast) set the speed at
You can set your Memo EXPRESS pager to alert	which the message is displayed.
	➍ Press Q or W.
with one of four musical alerts or one standard	NOTE: Read messages line-by-line when operat-
beep alert.
	ing your pager at temperatures below freezing.
NOTE: Your pager’s incoming message alert
	READING MESSAGES
mode must be set to AUDIBLE to choose one of
the pleasing alerts.	When a message is received, the pager alerts
➊ Press U until SET ALERTS ? is displayed.
	with an audible or a vibrate alert and a flashing
➋ Press Q. The current setting is displayed.	message indicator (À).
➌ Press U until your choice of ALERT 1, ALERT 2,	➊ Press any button to stop the alert.
ALERT 3, ALERT 4, or ALERT 5 is displayed.	➋ Press W to display the message. If there are
➍ Press W to return to the standby screen.	additional message screens, B is displayed.

Example of Read screen with message continuation indicator

5 6