When the screen is first displayed, the cursor is at the far left position.
This symbol defines the alarm status
➏From the Set Message Alarm screen follow the same steps described in the Setting The Alarm.
Setting the Alert Mode
The alert can be set as either audible or silent.
➊Press ç to display the function menu.
➋Press Š to move the cursor to the Speaker ƒ or Speaker Slash Îsymbol.
The Speaker ƒ symbol is displayed if the pager is in the silent alert mode (prompting you to enter the audible mode, if desired).The Speaker Slash Îsymbol is dis- played if the pager is in the audible alert mode (prompting you to enter the silent mode, if desired).
➌Press ç to select the desired alert mode.
If the selected mode is audible ƒ, your pager emits a short chirp. If the selected mode is silent Î, and if equipped with a vibrator, your pager vibrates.
Setting The Alert Pattern
NOTE: The pager must be in the audible alert mode to select the alert pattern.
Your pager has a standard alert (1), seven different pleas- ing alerts (2 through 8), and a chirping alert (Í symbol) allowing you to select and change the alert.You can also select no alert (Îsymbol).
10
