Motorola BLE87 Backward Compatibility, Forward Path, Return Path, Model Availability

BACKWARD COMPATIBILITY

The reversible BLE87 electronics package can be made backward compatible with the STARLINE JLX and 10-Amp BLE housing by installing the BLE-15A Kit. This kit contains 50 mil gold plated platform assemblies. This makes it possible for the amplifier to carry 15 Amperes continuous through the input or output ports.

If an “electronics only” package is ordered, it will include the deeper housing cover to accommodate ergonomic accessories. Note: this is not the deeper housing cover associated with the status monitor. When ordering the status monitor option, a deep housing cover is also required.

FORWARD PATH

The operational gain of the BLE87 is 28 dB or 32 dB depending on model, with 16 dB return loss. Output level control is achieved through the use of an interstage Bode equalizer, which compensates for coaxial cable attenuation changes due to temperature. Equalization may be controlled manually, with a thermal drive unit (model TDU) or with a single pilot closed loop automatic drive unit (model ADU-* or QADU). Both the TDU and the ADU boards are common to the STARLINE family of amplifiers (with the exception of the SLE). ADUs utilize Surface Acoustic Wave (SAW) filters for determining pilot frequency. This improves amplifier stability over temperature.

To further ensure system flexibility, installation ease and maintenance, the amplifier is engineered for compatibility with standard accessories, such as attenuators, equalizers, ADUs or TDUs, return amplifiers, automotive fuses and FTEC- BTA crowbar circuits.

The BLE87 uses modular diplex filters which can be changed for a different frequency split as required. The amplifier can be configured with S-split filters for a 5-40 MHz return and a 52-870 MHz forward band. K-splits (5-42 MHz/54-870 MHz), J-splits (5-55 MHz/70-870 MHz), and A-splits (5-65 MHz/85-870 MHz) are also available. These same filters can be used for all current US-style Motorola RF distribution amplifiers (models BLE, MB/MBE, BT).

RETURN PATH

Return amplifier kits can be ordered with either high gain or low gain hybrids providing 24 dB and 19 dB minimum station gain, respectively. Return path equalizers from 0 to 12 dB can be customer selected. Optional features include thermal compensation and ingress control switching. Thermal compensation comes in the form of a plug-in JXP-TH*C, which stabilizes gain and match over temperature extremes.

Also available is Ingress Control Switching (ICS) in 3 states. This pin diode attenuator circuit can lower levels by 6 dB or by 38 dB with a controlled slew rate for minimum bit errors. The LIFELINE® Broadband Line Extender transponder, model LL-BLE-HMS-*/*, and accompanying deeper housing lid are required to operate the Ingress Control Switch from a remote location.

MODEL AVAILABILITY

To reduce customer costs and to accommodate customer specific needs, the STARLINE BLE87 can be ordered in a variety of different models. Please refer to the BLE87 ordering information below for options.

2

Motorola, Inc.
Connected Home Solutions
101 Tournament Drive
Horsham, PA 19044
1.800.523.6678	MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
www.motorola.com/broadband
	All other product or service names are the property of their respective owners.
Rev. 1.0	© Motorola, Inc. 2003
09.01.05	Specifications are subject to change without notice.