Motorola DCH3200 2 OPERATION Turning Power On and Off , Changing Channels , Adjusting the Volume , Interactive Program Guide , Front Panel Format Button

2 OPERATION

Press POWER on the front panel or remote control to turn the DCH receiver on or off

(standby). When using the remote control, be sure it is in cable mode by pressing

CABLE before pressing POWER.

You can change channels in three ways:

• Press CHANNEL + or – on the front panel of the DCH receiver or the remote

control to step through the channel selection.

• Enter the number of the channel you wish to view using the number keys on the

remote control.

• Select the channel in the Interactive Program Guide.

Press VOLUME + or – on the remote control to adjust the volume. When you adjust

the volume, the volume scale is displayed on the screen. Press MUTE on the remote

control to toggle the sound on and off.

For best audio quality, use the remote control to set the DCH receiver to

approximately three quarters of the maximum volume level and then adjust the

audio levels on external devices such as your TV or A/V receiver.

The Interactive Program Guide displays information about TV programs and enables

you to access features such as Parental Control or Pay-Per-View. Interactive program

guides can vary with each cable service provider. Refer to the Interactive Program

Guide’s instruction manual for detailed instructions.

The Format button located on the front panel of the DCH3200 allows you to quickly

change the video output format on the Component Video (YPbPr) and HDMI outputs

of the product. The DCH3200 is capable of providing the following video formats on

the YPbPr and HDMI video outputs:

• High Definition 1080i (1920 x 1080 pixels)

• High Definition 720p (1280 x 720 pixels)

• Enhanced Definition 480p (720 x 480 pixels)

• Standard Definition 480i (720 x 480 pixels)