DCP5013
Connecting Other Audio/Visual Sources
Page 39 — Change the heading to read Connecting Other Audio/Video Sources and change the text on the page to read as follows:
You can connect an alternate audio/video source such as another DVD player by following the diagram.
If you wish to use the digital audio output from a DVD player to the DCP501, you must assign either the Optical1 or Coaxial digital audio input to the corresponding DCP501 video input source by using the INPUT SETUP screens. If the DVD player is connected to the VIDEO2 inputs on the front panel, the DCP501 automatically uses the OPTICAL2 digital audio input over the analog input if it is available. See the “Operations” section for information on using the INPUT SETUP screens.
Before connecting the DVD player, check the manual supplied with the DVD player for the manufacturer’s installation guidelines.
Operation
Setting Up Audio
Page 46 — Change the first paragraph to read as follows:
This section includes information about setting up speakers and selecting audio inputs. During playback from an external source such as a VCR, the DCP501 automatically selects which audio input to use. If the audio input is digital, always use a digital input. Once a digital input is assigned to a particular source, the DCP501 always uses the assigned digital audio input instead of the analog audio input if both are present for the same source. You must select various input sources from the INPUT SETUP menu so the DCP501 knows which digital inputs are assigned. The DCP501 display shows the current audio input used by the selected source:
O P T 1 , O P T 2 , C O A X , or A N A L O G . For digital audio inputs only, the DCP501 turns on an icon to distinguish the digital input type: P C M , D T S , or D D I G I T A L .
Input Setup
Page 48 — Change step 7 to read as follows:
1During playback from one of the external sources, the DCP501 automatically selects which audio input to use. The DCP501 defaults to a digital audio input if one is present. You must select various input sources from the INPUT SETUP menu so the DCP501 knows which digital inputs are assigned. The DCP501 display shows the current audio input used by the selected source: O P T 1 , C O A X , or A N A L O G . For digital audio inputs only, the DCP501
turns on an icon to distinguish the digital input type, P C M , d t s , or D D I G I T A L .
Subwoofer and Speakers
Page 49 — Change the first paragraph to read as follows:
This option defines whether a subwoofer speaker is connected to the
DCP501 User Guide Addendum