OPERATION

Turning Power On and Off

Press POWER on the front panel to turn the cable terminal on or off. When using the remote control, be sure it is in cable mode by pressing CABLE before pressing POWER.

Changing Channels

You can change channels in two ways:

•Press CHANNEL S or T on the cable terminal front panel, or press CHANNEL + or - on the remote control to step through the channel selection.

•Enter the number of the channel you wish to view using the number keys on the remote control.

Adjusting the Volume

Press VOLUME + or – on the remote control to adjust the volume. When you adjust the volume, the volume scale is displayed on the screen. Press MUTE on the remote control to turn the sound off and on again.

For best audio quality, use the remote control to set the cable terminal to approximately ¾ of the maximum volume level, and then adjust the audio levels on external devices such as your TV or audio/visual (A/V)

Receiver.

Interactive Program Guide

The interactive program guide (IPG) displays information about TV programs and enables you to access features such as Parental Control or Pay-Per-View. IPGs can vary with each cable provider. Refer to your IPG manual for detailed instructions.

8