DCT6400 Series User Guide

Connecting HDTV – Video Only

Component Video (YPbPr)

1Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the DCT*.

2Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and DCT*.

This connection supports only the high-definition video connection between the DCT* and the HDTV. To connect the audio connections for your HDTV, proceed to the following page. To connect your audio connections for an A/V receiver, go to “Connecting Your DCT* to an A/V Receiver – Audio Only.”

IEEE 1394

If your HDTV has an IEEE 1394 connector, you can use the IEEE 1394 for both your video and audio connection:

•Connect an IEEE 1394 cable to the IEEE 1394 connector on your HDTV and DCT*.

On-screen graphics will not be displayed when you are using the IEEE 1394 connection on the rear panel of the DCT*.

DVI

If your TV has a DVI input, use the DVI connection for your video:

•Connect a DVI cable to the DVI-D OUT connector on the DCT* and the DVI-HDTVconnector on your TV.

This connection supports only the high-definition video connection between the DCT* and the HDTV. To connect the audio connections for your HDTV, proceed to the following page. To connect your audio connections for an A/V receiver, go to “Connecting Your DCT* to an A/V Receiver – Audio Only.”

For information on configuring your DCT* settings, see “Optimizing Your DCT* for High Definition TV.”

19