Batteries, Low Battery Alert, For DPS Model

Batteries

The Ni-Cad battery ships uncharged, it must be fully charged for 16 hours before use (ﬁrst charge only). It is recommended that only Motorola batteries and chargers be used with the radio.

The Ni-Cad rechargeable battery pack will provide approximately 8 hours of operation with normal use (5% sending messages, 5% receiving messages and 90% in standby mode).

Low Battery Alert

When the battery is low, the radio will beep:

•3 to 4 seconds after turning power on

•Every 10 minutes in standby mode

•After release of the Push-To-Talk button

Recharge the battery pack immediately to avoid interrupted use.

Note: Remove battery pack before storing your radio for extended periods. Batteries may corrode over time if left in radio and can cause permanent damage to your radio.

To Install/Remove Ni-Cad

Battery

Note: Radio must be OFF before installing/ removing battery.

1.Push back both battery cover latches until you see the orange tabs.

2.Slide battery cover down and lift to remove. Fig. D

3.Insert the battery pack with arrows pointing towards the top of the radio. Fig. E

4.Replace battery cover and lock latches.

5.To remove battery, remove cover, turn the radio over and tap the battery end of the radio against the palm of your hand. The battery will drop into your hand. Fig. F

Note: Do not remove the plastic wrap from the battery pack. This will permanently dam- age the battery.

To Charge Ni-Cad Battery

1.Turn the radio off.

2.Lift accessory cover and plug the Charger Adapter ﬁrmly into the small jack (lower hole).

3.Plug the charger into an electric outlet.The light on the charger will glow continuously if charging properly.

4.Allow 10 hours for the battery to fully charge.

Notes:

•For optimum battery life, the battery should not be left charging for prolonged periods after reaching full charge. Charg- ing the battery over the weekend is acceptable.

•Turn radio off when charging. If radio is on while charging, at least twice as much time is required to charge the battery.

Installing Alkaline Batteries

For DPS Model

Your TalkAbout Distance DPS radio has the option of operating with either a Ni-Cad bat- tery pack or 6 AA alkaline batteries. Alkaline batteries will last about 25 hours with normal use. That’s approximately 5% sending mes- sages, 5% receiving and 90% in standby mode.

To Install Alkaline Battery Tray

1.Unlock battery cover latches and remove battery cover and Ni-Cad battery pack.

2.Remove Ni-Cad tray by squeezing latch on bottom of tray and lift out. Fig. G

3.Align the tabs on the top and sides of the alkaline battery tray with the slots in the radio. Contacts on battery tray should match contacts with radio. Fig. H

4.Press bottom of battery tray into radio.

To Remove Alkaline Battery Tray

1.Holding radio as shown in Fig. I, press thumb on top of alkaline tray to pop bottom edge out of radio.

2.Grasp the bottom edge of the tray and pull it out of the radio.

FIG. F

FIG. D

FIG. E

FIG. H

FIG. I

FIG. G

DPS specifications

Motorola DPS, or Digital Public Safety, represents a significant advancement in communication technology tailored to meet the needs of first responders and public safety agencies. The system operates on a robust digital platform that enhances the clarity and reliability of voice communication, which is crucial during emergencies.

One of the standout features of Motorola DPS is its interoperability. The system is designed to enable seamless communication across different agencies and organizations, ensuring that police, fire, and medical services can coordinate effectively during incidents. This is achieved through a variety of protocols and standards, allowing dispatchers and responders to share information in real-time, regardless of their communication devices.

The technology behind Motorola DPS incorporates advanced radio frequency (RF) systems that provide extensive coverage and improved signal strength. This is particularly important in urban environments where buildings and other structures can obstruct signals. The system often utilizes a combination of analog and digital signals to maintain uninterrupted communication, even in challenging conditions. Moreover, features such as push-to-talk (PTT) allow for instant communication, which can be a game-changer during critical situations.

Another key characteristic of Motorola DPS is its emphasis on security. The system integrates encryption technologies that protect voice and data communications from interception. This ensures that sensitive information remains confidential, which is essential for operational integrity and public trust.

Motorola DPS is also equipped with features like real-time location services (RTLS) and data analytics capabilities. These tools enable public safety officials to track resources, manage incidents more efficiently, and make data-driven decisions. The analytics component allows agencies to evaluate past incidents and improve future response strategies.

In addition, the system’s user-friendly interface simplifies training for new users. This ensures that all personnel can quickly learn to navigate the system and utilize its functions effectively. Furthermore, the scalability of Motorola DPS allows agencies to expand their communication capabilities as needed, accommodating future growth without significant disruption.

In conclusion, Motorola DPS embodies a comprehensive communication solution designed to enhance the effectiveness of public safety operations. With its emphasis on interoperability, security, and user-friendly design, it plays a pivotal role in modern emergency response efforts, ensuring that first responders can communicate clearly and effectively when every second counts.

Motorola Batteries, Low Battery Alert, To Install/Remove Ni-Cad Battery, For DPS Model

Models: DPS