DS3578 PosterDS3578 PosterPERF PERFBLACKPANTONE 285

SYMBOL DS3578

SYMBOL DS3578

4
3
1
2
2
012345
012345
012345
012345
OPTIMUM UPRIGHT BODY POSTURE
Low-medium-high beeps
Power up
Normal beep
Bar code decoded [if
decode beeper enabled]
4 long low beeps
Transmission error
detected; data is ignored
4 short high beeps
Low battery
indication
Short low-high beeps
Scanner has paired with
the cradle
Short high-low beeps
Scanner has unpaired
with the cradle
Standard Use
Long low-high beeps
Input error, incorrect programming
sequence,or Cancel bar code scanned
High-low-high-low beeps
Successful program exit with change
in the parameter setting
Parameter Menu ScanningBeeper IndicationsStandard UseLED Indications
Off
No power applied to scanner (battery
discharged or removed), or scanner
is in low power and ready to scan
Green
Bar code successfully
decoded
Red
Data transmission
error or scanner malfunction
or Symbol DS3578 scanner
inserted into an STB3478
cradle
Charging Use
Green Slow Flash
Scanner charging at
a slow rate (used
when cradle is
powered by host cable)
Green Fast Flash
Scanner charging at a
fastrate (used when
cradleis powered from
external power supply)
Red and Green Flash
Temperature fault
Red Flash
Charging problem
See Product Reference
Guide for more
information
Recommended Usage Guide
OPTIMUM SCANNING POSITIONS
TAKING BREAKS AND TASK ROTATION RECOMMENDEDTAKING BREAKS AND TASK ROTATION RECOMMENDEDALTERNATE LEFT AND RIGHT HANDSALTERNATE LEFT AND RIGHT HANDSAiming1 Tether Plate2 LED Indicators3 Scan Window4 Scan TriggerOptimum body posturefor low scanning
OPTIMUM BODY POSTURE
Alternate leftand right kneesOptimum body posture forextended range scanning
72E-111604-02
Revision B February 2010
REGULATORY INFORMATION
AVOID EXTREMEWRIST ANGLESAVOID REACHINGAVOID BENDING
Long low-high beeps or
Long low-high-low-high beeps
Unsuccessful pairing attempt
LED IndicatorPOST IN WORK AREAPOST IN WORK AREASYMBOL DS3578

Quick Start Guide

Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying the radio(s) are approved for
use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, & Europe1.
Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is
available at http://www.motorola.com/enterprise/doc.
Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Radio Modules
This device contains approved radio module(s). These module(s) are identified below.
Symbol Bluetooth radio Type: LMX5452
Bluetooth Wireless Technology
This is an approved Bluetooth product. For more information or to view End Product Listing, please visit
https://www.bluetooth.org/tpg/listings.cfm
Other Countries
Declarações Regulamentares para Symbol DS3578 BRAZIL
NOTA: A marca de certificação se aplica ao Equip. de Radiação Restrita, modelo Symbol DS3578.
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.”
Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br
CHILE
“Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.”.
Taiwan
Korea
For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expression should be displayed ;
.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, June 24, 2007 and
EN60825-1:2007 and IEC 60825-1(ED.2). The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement
is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user
should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human exposure to electromagnetic fields from
radio devices. For information on “International” human exposure to eletromagnic fields refer to the Motorola/Symbol
Declaration of Conformity (DoC) at http://www2.symbol.com/doc/.
EU - Handheld Devices
To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum separation
distance of 20cm or more from a person’s body. Other operating configurations should be avoided.
US and Canada - Handheld Devices
To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum separation
distance of 20 cm or more from a person’s body. Other operating configurations should be avoided.
Power Supply
Use only a Motorola/Symbol approved power supply output rated at 9Vdc and minimum 2A. The power supply shall be Listed
to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with SELV outputs. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance
with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in
sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.
Battery Information
Motorola/Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry.
However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors
affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store
batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of
metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at
least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is 12 months, regardless if the battery was purchased separately or
included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit:
http:/mysymbolcare.symbol.com/battery/batbasics1.html.
Battery Safety Guidelines
• The area in which the units are charged should be clear of debris and combustible materials or chemicals.
Particular care should be taken where the device is charged in a non commercial environment.
• Follow battery usage, storage, and charging guidelines found in the user's guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger temperatures must be
between +32 º F and +104 º F (0 º C and +40 º C)
• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk
of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or
a charger, contact Motorola Enterprise Mobility support.
• For devices that utilize a USB port as a charging source, the device shall only be connected to products that
bear the USB-IF logo or have completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water
or other liquids, or expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or
near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-chargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been swallowed.
• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected area with large amounts of water and seek medical advice.
• If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange
for inspection.
Radio Frequency Interference Requirements - FCC
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
FOR HOME OR OFFICE USE
Regulatory Information
This device is approved under the Symbol Technologies brand: Symbol Technologies, Inc. is the Enterprise Mobility
business of Motorola, Inc. ("Motorola"). This guide applies to Model Number DS3578
All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they are sold and
will be labeled as required. Local language translations are available at the following
website: http://www.motorola.com/enterprisemobility/manuals. Any changes or modifications to Motorola/Symbol
equipment, not expressly approved by Motorola/Symbol, could void the user's authority to operate the equipment.
CAUTION:
Only use Motorola/Symbol approved and UL Listed accessories, battery packs and battery chargers.
Avoid Extreme Wrist Angleshttp://www.motorola.com/ds3578
MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office.
All other product or service names are the property of their respective owners. © Motorola, Inc. 2010
Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA • 1-800-927-9626
Available at the following website: www.motorola.com/enterprisemobility/support
© MOTOROLA, INC. 2010 All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability, function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent,
covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola
products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola
products.
MOTOROLA, the Stylized M Logo and Symbol and the Symbol logo are registered trademarks of Motorola, Inc. Other
product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and
are hereby acknowledged.
Motorola, Inc.
One Motorola Plaza
Holtsville, N.Y. 11742-1300
www.motorola.com/enterprisemobility
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty.
Patents
This product is covered by one or more patents. For patent information go to:
http:// www.motorola.com/enterprisemobility/patents.
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult
with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent
employee injury.
• Reduce or eliminate repetitive motion • Reduce or eliminate vibration
• Maintain a natural/neutral position • Reduce or eliminate direct pressure
• Reduce or eliminate excessive force • Provide adjustable workstations
• Keep objects that are used frequently • Provide adequate clearance
within easy reach • Provide a suitable working environment
• Perform tasks at correct heights • Improve work procedures
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem
with the equipment, they will contact the Motorola Enterprise Mobility Support at:
http://www.motorola.com/enterprisemobility/contactsupport.
For the latest version of this guide go to: http://www.motorola.com/enterprisemobility/manuals.
Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres – Vehicles Use
You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc.
and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area
where you would normally be advised to turn off your vehicle engine.
Potentially Hazardous Atmospheres – Fixed Installations
You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc.
and areas where the air contains chemicals or particles (such as grain, dust, or metal powders).
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers
a ‘flight mode’ or similar feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical equipmet.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld
wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations
are consistent with independent research and recommendations by Wireless Technology Research.
Persons with Pacemakers:
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimise the potential for interference
• If you have any reason to suspect that interference is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the operation of your
wireless product may interfere with the medical device.
Warnings for Use of Wireless Devices
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Radio Frequency Interference Requirements – Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Marking and European Economic Area (EEA)
Bluetooth® Wireless Technology for use through the EEA has the following restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz
• France, outside usage is restricted to 10mW EIRP
• Italy requires a user license for outside usage.
Statement of Compliance
Motorola/Symbol hereby, declares that this device is in compliance with the essential requirements and other
relevant provisions of Directives 1999/5/EC. Declaration of Conformities may be obtained from
www.motorola.com/enterprisemobility/doc/.
Japan (VCCI) - Voluntary Control Council for Interference
B
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause
radio interference. Install and use the equipment according to the instruction manual.
Korean Warning Statement for Class B ITE
CAUTION - CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE
INTO THE BEAM. ATTENTION-LUMIÈRE LASER EN CAS D'OUVERTURE .
NE PAS REGARDER DANS LE FAISCEAU. VORSICHT - LASERLICHT
KLASSE 2, WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAH
L
BLICKEN. SEE QUICK REFERENCE GUIDE FOR PATENT INFORMATION.
COMPLIES WITH 21CFR1040.10 AND 1040.11
EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE No. 50, DATED JUNE 24, 2007,
EN60825-1:2007AND IEC 60825-1(ED.2) THIS CLASS B DIGITAL
APPARATUS COMPLIES WITH CANADIAN ICES-103. CET APPAREIL
NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA. SEE PRODUCT GUIDE FOR PATENT INFO
XXXXXXXXXX
LASER LIGHT- DO NOT STARE INTO BEAM . CLASS 2
LASER PRODUCT. LASERLICHT -
NICHT IN DEN
STRAHL BLICKEN. LASER KLASSE 2. LUMIÈRE
LASER - NE PAS
REGARDER DANS LE FAISCEAU.
APPAREILÀ LASER DE CLASSE 2 630-680nm, 1mW
P/N: DS3578-XXXXXXXXXX
BD_ADDR: XXXXXXXXXXXXX
(S)SN: XXXXXXXXXXXXX
MFD: XXXXXXX XXXX
SN BAR CODE
SYMBOL TECH INC. N.Y.
FCC ID: H9PLMX5452
IC: 1549D-LMX5452
0168
THIS DEVICE CONTAINSAN
APPROVED RADIO MODULE LMX5452
MODEL:DS3578
50
CMIIT ID: XXXXXXXXX
R003WWA080669
CCXXxxYYyyyZzW
XXXXXX
MADE IN XXXXXX
Aiming
Български:
Waste Electrical and Electronic Equipment (WEEE)
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için
Motorola'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu
adresi ziyaret edin: http://www.motorola.com/recycle/weee.