Motorola FD-1 manual Technical specifications, Auxiliary functions F1 to F4, Point connections

English FD-1

Auxiliary functions F1 to F4

The auxiliary functions F1 to F4 can be switched via the central unit. They are available for the switching of optional accessories (e.g. cab lighting, carriage lighting, smoke generator, noise module).

Point connections

X1 to X4	Solder points for setting the address.
X5 and X6	Connections to the rails. X5 must be connected to the
	central conductor.
X7	Accessory /-ies with a maximum current consumption of
	800 mA*. Switched via F3.
X8	Accessory /-ies with a maximum current consumption of
	500 mA*. Switched via F4.
X9	Accessory /-ies with a maximum current consumption of
	800 mA*. Switched via F1.
X10	Accessory /-ies with a maximum current consumption of
	800 mA*. Switched via F2.

* Maximum current consumption of all accessories = 1.000 mA!

Technical specifications

Data format	Motorola I
Supply voltage	12-24 Volt digital voltage
Current consumption
(without connected loads)	ca. 10 mA
Max. current per function output	500 resp. 800 mA
Max. total current	1.000 mA
Protected to	IP 00
Ambient temperature in use	0 - + 60° C
Ambient temperature in storage	-10 - + 80° C
Comparative humidity allowed	max. 85 %
Dimensions	ca. 18 x 35 x 4 mm
Weight	ca. 2 g
Page 22