AT Commands Summary
1-34 AT Commands Reference Manual December 31, 2007
M This command is supported for backward compatibility only, and
has no effect. Page 3-422
NThis command is supported for backward compatibility only, and
has no effect. Page 3-422
PThis command is supported for backward compatibility only, and
has no effect. Page 3-422
TThis command is supported for backward compatibility only, and
has no effect. Page 3-422
YThis command is supported for backward compatibility only, and
has no effect. Page 3-422
+FAR This command is supported for backward compatibility only, and
has no effect. Page 3-423
+FCL This command is supported for backward compatibility only, and
has no effect. Page 3-423
+FDD This command is supported for backward compatibility only, and
has no effect. Page 3-423
+FIT This command is supported for backward compatibility only, and
has no effect. Page 3-423
Fax Class 1
Fax Commands
+FCLASS This command places the terminal in particular mode of operation
(data, fax, voice). Page 3-424
+FTS This command causes the G24 to stop any transmission. Page 3-425
+FRS This command causes the G24 to listen and to report back an OK
result code when the line has been silent for the specified amount of
time.
Page 3-425
+FTM This command causes the G24 to transmit data. Page 3-426
+FRM This command causes the G24 to enter the receive mode. Page 3-428
+FTH This command causes the G24 to transmit data framed in the HDLC
protocol. Page 3-428
+FRH This command causes the G24 to receive HDLC framed data and
deliver the next received frame to the terminal. Page 3-430
+IFC This command controls the operation of the local flow control
between the terminal and the G24. Page 3-430
+FPR This command sets the request baud rate. Page 3-4 32
Table 1-1:AT Commands (Cont.)
AT Com man d Description Page