Motorola H605 manual Making Calls, Audio Tones

MAKING CALLS		MAKING CALLS CONTINUED
Function	Action	Function	Action
Make a voice dial call	Tap the Call button	Toggle between two	Press and hold
	and speak the	active calls	the Call button
	name after the tone	Join a 3-way call	Press and hold
End a call	Tap the Call button		both Volume buttons
Receive a call	Tap the Call button	Put an active call on	Press and hold the
Reject a call	Press and hold the	hold or resume a call	Call button until you
		on hold	hear a beep
	Call button until you
		Transfer a call from the	Tap the Call button
	hear a beep
Redial last call	Press and hold the	phone to the headset
		Disable or enable the	Press and hold
	Call button until you
	hear a beep	indicator light	both Volume
Answer a second	Press and hold the		buttons for 3 to 4
			seconds
incoming call	Call button (places
		Mute or unmute a call	Tap both Volume
	first call on hold)
Note: Your H605 supports both Handsfree and Headset			buttons
Profiles. Accessing call functions depends upon which		Note: Some features are phone/network dependent.
profile your phone supports. See your phone's user's guide
for more information.

AUDIO TONES		AUDIO TONES CONTINUED
The audio tones provide information about your
headset status.
Audio Tone	Headset Status	Function	Action
Single high tone when	Volume at minimum	Single high tone	End call
pressing volume button	or maximum	Low to high tone	Phone network
Five rapid high tones	Low battery		not available
repeated every 60 sec.		Two ascending tones	Mute enabled
No audio indications;	Out of range
		Two descending tones	Mute disabled
deteriorating quality
Ring tone	Incoming call
Single high tone	Pairing confirmation
Single low tone	Voice activation
Dual high/low tone	Voice tag not
	recognized