Motorola HF850 manual Installing the Power Cable and Fuse Kit

Installing the Power Cable and Fuse Kit

Caution: Failure to follow these steps may cause the accessory not to work properly and may cause damage to the car kit.

Speaker (SSN4020)

Microphone
(SMN4095B)	Wire Crimps:
	green to green,
User	red to red,
	black to black
Interface
Module
(SYN1101A)

Junction Box (SYN1102A)

Power Cable (SKN4834A)

Vehicle

Radio

	Orange
	Blue
	Yellow
	Green:
	to fuse
Black:	box
	Red: to a point in
to
	fuse box that is
vehicle
	always active
chassis
	4 - 5 AMP fuse
	Fuse Kit (SKN4937A)

1Remove all fuses and tape them to their respective holders. DO NOT re-insert fuses until you complete and inspect all connections.

2Connect the fuse kit’s GREEN Ignition Sense wire (3 amp fuse) to an ignition-switched location on the fuse block. When the ignition is off, the ignition sense line is low.

8