Motorola HS820 quick start

1 - CHARGE

2 - PAIR

3 - START

BLUETOOTH

4 - TEST AND

USE

Get Connected in

4 Quick Steps

Quick Start Guide

HS820

Bluetooth®

Handsfree Headset

TEST AND USE

Your phone and headset are now paired

and ready to make and receive calls.

To make a call:

Place the headset over your ear.

On your phone, dial the number you want

to call and press the SEND key.

If your phone and headset are successfully

paired, you will hear ringing on the headset.

After you have successfully paired your

phone and headset, you do not need to

repeat these steps. For daily use, ensure

that your headset is turned ON and that

your phone's Bluetooth feature is ON.

To conserve battery power, turn OFF the

headset when you will not be using it for an

extended time.

QUICK TIPS TROUBLESHOOTING

My phone does not find my headset

Make sure the blue light on your headset is on

and steady when your phone is searching for

devices (see step 2).

My headset worked before but now it's not

working.

Make sure your phone is on and the Bluetooth

feature is turned on in your phone (step 3). If

the Bluetooth feature has been turned off, you

may need to restart the Bluetooth feature (see

step 3) and pair your phone and headset again

(see step 2).

SUPPORT

If you need more help, contact us at

1- 877-MOTOBLU.

FOR DETAILS ABOUT YOUR HANDSFREE

HEADSET

See the User’s Guide or visit us at

www.hellomoto.com/bluetooth and click

Support.

MOTOROLA and the Stylized M Logo are registered in the US

Patent & Trademark Office. The Bluetooth trademarks are

owned by their proprietor and used by Motorola, Inc. under

license. All other product or service names are the property of

their respective owners. © Motorola, Inc. 2005.

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196 USA

www.hellomoto.com

1-877-MOTOBLU

1-800-331-6456 (United States)

1-888-390-6456 (TTY/TDD United States for

hearing impaired)

1-800-461-4575 (Canada)

Guide Number: 6809494A71 -A

If you need more help, contact us at

1- 877-MOTOBLU.

Charge your headset for 2 hours:

Plug the Motorola charger into the top of

the headset with the release tab facing

down.

The blue light turns on when the

headset is charging. It may take up to 1

minute for the blue light to turn on.

When the headset is fully charged (about

2 hours), the blue light turns off.

Unplug the charger from the headset.

CHARGE YOUR

HEADSET

To turn on the headset, press and hold the

Call E button on your Bluetooth headset for 5

seconds. The blue light will flash rapidly and

then flash slowly.

To answer or end a call, press the

Call E button on the headset.

To adjust the volume, press the Volume

buttons (shown in step 2) on the headset.

NOTE: The Volume buttons are initially set up

for wearing your headset on your right ear (like

shown in step 2)--with the top button used to

increase volume. You can set which button is

used to increase volume by pressing and

holding the desired Volume button (along with

the Call E button) while turning on the

headset.

To turn off the headset, press and hold the

Call E button on your Bluetooth headset for 5

seconds. The blue light will flash rapidly and

then stop flashing.

For help, contact us at 1- 877-MOTOBLU

PUT YOUR HEADSET

IN PAIRING MODE

CONTINUED

Press and hold the Call E button for 6 to 10

seconds until the blue light turns on and

remains on.

NOTE: The blue light will flash as you press

and hold the Call E button. Continue

holding down the Call E button until the

blue light is steadly lit.

NOTE: If you let go of the Call E button

before the blue light is on and steady,

ensure that your headset is off before trying

again (see QUICK TIPS for instructions on

turning off your headset).

PUT YOUR HEADSET

IN PAIRING MODE

Ensure the headset is powered off (the blue

light is not blinking).

Before you can use your headset, you must pair

(bond) it with your phone.

Call Button

Blue Light

Volume

Buttons

TURN ON BLUETOOTH

ON YOUR PHONE AND

PAIR WITH HEADSET

Press (Menu) key.

Select Settings.

Select Connection.

Select Bluetooth Link

Select Setup

Scroll to Power and select CHANGE.

Select On.

4

5

Your phone's Bluetooth feature is off by default.

To use your headset, the Bluetooth feature

must be turned on in your phone.

To turn on Bluetooth:

M(

6

TURN ON BLUETOOTH

ON YOUR PHONE AND

PAIR WITH HEADSET

CONTINUED

Select BACK.

Select Handsfree.

Select [Look For Devices].

NOTE: Do not select STOP---you will

automatically be taken to the next screen.

Select Motorola HS820.

Select YES to bond.

Enter the passkey 0000 and select OK.

When your headset and phone are

successfully paired, the blue light on your

headset will change from steadly lit to

flashing.

8

9

10

7

Release Tab Down