33 English
SCAN
SCAN
You can monitor multiple channels and receiv e
any calls that are transmitted on them. Sixteen
different channels can be programmed into
each scan list by the dealer. Your radio will
automatically switch to a scan list channel
when it detects activity on it.
Note: The same channels can be assigned to
different scan lists.
STARTING OR STOPPING SCAN G
The Gsymbol, and the channel you are
transmitting on, will appear on the LCD screen
when you start a scan operation.
The LED indicator blinks green during a scan
operation, and stops blinking when the radio
switches to a channel.
Note: If you enter Menu Mode while the radio
is scanning, scanning will stop. It will
resume when you exit Menu Mode.
To start or stop a scan operation:
Press the preprogrammed Scan button (see
page 10) to start or stop scanning.
–or–
Do the following:

TALKBACK

While your radio is scanning, Talkback allows you
to participate in a call in progress. You must
press the PTT button to participate in the call;
otherwise, scanning continues to the next
channel.
1) to enter Menu Mode.
2+ or ? until System Scan
3) to select System Scan
4+ or ? until
–or–
5) to confirm your selection.
System Scan
System Scan
Sys Scan On?
Sys Scan Off?
Scan.fm Page 33 Monday, September 30, 2002 2:09 PM