37
Turning Your Pager On
➊Press r. The start-up screens are displayed
and your pager activates the power on chime
(when in audible mode).
➋Press any button to stop the alert.
The unread message (home) screen is
displayed.
When your pager is on and no activity is
taking place, the Standby screen is
displayed. The Standby screen displays the
time and date and may display other status
indicators.
m 88 f hjlb
e
m 88 f hjlb
e
m 88 f hjlb
e
GETTING STARTED
38
Turning Your Pager Off
➊From the Standby screen, press t twice.
➋Press and release r until PAGER OFF is
displayed, then press s.
OFF is displayed momentarily before the
pager shuts off, and m is removed from the
display.
The off screen displays the time and date,
and if the alarm is set, the alarm indicator.
m 85 f hjlb e
PAGER OFFm 85 f ojlb
e
OFF
m 88 f ojlb
e
GETTING
STARTED
39
Sending a Test Page to Yourself
After you have read this guide and your pager has been activated by your
service provider, send yourself a test page. Refer to "Functionality and Use of
Your Pager" on page 61.
Backlight
In low-light conditions, press and hold t for 2 seconds to turn on the pager’s
backlight. The backlight turns off automatically after the pager returns to the Standby
screen.
Setting up Your Pager
This section gives instructions for setting the time and date. Access to this feature is
obtained through the Setup Pager menu.
GETTING STARTED
40
Setting the Time and Date
➊From the Standby screen, press t twice.
➋Press and release r until SET UP PAGER is
displayed.
➌Press s.
TIME/DATE is displayed.
➍Press s.
FORMAT!AM/PM or FORMAT!24HR is displayed.
➎Press and release r until your choice of
FORMAT!AM/PM (for AM/PM time), or FORMAT!24HR
(for 24-hour time) is displayed, then press s.
m 86 f hjlb e
SET UP PAGERm 81 f hjlb
e
m 85 f hjlbe
FORMAT! AM/PM
TIME
AND
DATE