8.An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of a fire and/or electric shock. If an extension cord must be used, make sure that:

• The pins on the plug of the extension cord are the same number, size and shape as those on the plug of the charger.

•The extension cord is properly wired and in good condition.

•The extension cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet.

9.The supply cord of the AC adaptor cannot be replaced. If the cord is damaged, call customer service at 1-800-638-5119 (U.S. and Canada) or e-mail us at giantintl@callcenter.com.

Licensing Information

Your Motorola radio operates on FRS & GMRS frequencies in Canada & in the USA. For Canadian citizens, use of these frequencies is subject to the rules & regulations of Industry Canada (IC). IC requires no license when operated in Canada. For USA citizens, use is subject to the rules and regulations of the Federal Communications Commission (FCC) . The FCC requires that all operators using GMRS frequencies obtain a radio license before operating their equipment. To obtain the FCC forms, please visit the FCC’s Web site at wireless.fcc.gov/uls/index.htm?job=home to source form 605 and 159, which includes all the instructions you will need. If you wish to have the document faxed or mailed, or if you have questions, please use the following contact information:

For a fax:

For mail service:

If you have

Contact the

Call the FCC

questions about

Fax-0n-Demand

Forms Hotline

the FCC License:

system

 

Call the FCC

 

 

 

1-202-418-0177

1-800-418-FORM

1-888-CALL-FCC

 

(3676)

(225-5322)

Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the IC/FCC to operate this radio and should not be made. To comply with IC/FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land, mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the IC/FCC equipment authorization for this radio could violate IC/FCC rules.

Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.

Control Buttons

Emergency Alert

Volume

LED Indicator

Push to Talk (High)

 

 

Accessory Port

Push to Talk

 

 

(Low)

 

 

Call Tone

 

Menu/ Keypad Lock

 

 

Flash Light

MENU MON

Scan/Monitor

Button

 

 

Scroll/Weather

 

 

Microphone

 

 

Mini-USB

 

Speaker

Charging Port

 

 

 

 

 

Flash Light LED

Display Screen Guide

Numbers for Channel,

Call Tone

Numbers for Codes

—Battery Meter

—Vibrate

 

—Channel Power

—Scan

Indicator

—Dual Scan

(see menu Options)

 

 

—Call Tone,

—Keypad Lock

Keypad Tone

—Talk Confirmation

—Weather Alert

 

Tone (Roger Beep)

—Hands-Free Use

 

—Noise Filtering

Without

Accessories

 

—On/Off for each

—Hands-Free Use

feature

With Accessories

 

Getting Started

Weatherproof

This radio is weatherproof to IP-54 standards. It is dust/splashproof from any direction. The radio is resistant to water and rain splashes only when the battery cover and headset accessory mini-USB ports are sealed. Open the battery compartment door or headset port cover only when the radio is dry. Use of a headset accessory should be in dry environments only.

The charging base and AC adaptor are not waterproof. Do not expose the charger to rain or snow. Charge the radios only in a dry location. Do not place wet radios into the charging base. The battery door must be tightly closed with the screw to maintain the weatherproof seal of the radio.

Installing the Batteries

Each radio can use either 1 NiMH rechargeable battery pack or 3 AA alkaline batteries and beeps when the batteries are low.

Installing NiMH Rechargeable Battery Pack

1.Turn the radio off.

2.With the back of the radio facing you, loosen the retaining screw on the battery door and open the cover.

3.Remove the NiMH battery pack from the clear plastic bag (do not disassemble or unwrap the battery pack).

4.Insert the NiMH battery pack with the diagram facing you. (The ribbon should be underneath the battery pack and should wrap around the right side of the pack for easy removal.)

5.Close the battery cover and tighten the retaining screw on the battery door.

Installing the Three AA Alkaline Batteries (Optional Accessory)

1.Turn the radio off.

2.With the back of the radio facing you, loosen the retaining screw on the battery door and open the cover.

3.Insert the three AA alkaline batteries with + and - polarity as shown inside. (The ribbon should be underneath the AA alkaline batteries and should wrap around the right side of the batteries.)

4.Close the battery cover and tighten the retaining screw on the battery door.

Radio Battery Meter

The radio battery icon shows the battery charge level, from full

to empty

. When the radio has one segment left, the

radio chirps periodically or after releasing (Low Battery Alert).

Removing the NiMH Battery Pack

1.Turn the radio off.

2.With the back of the radio facing you, loosen the retaining screw on the battery door and open the cover.

3.Remove the NiMH battery pack by pulling the ribbon attached to the radio.

4.Close the battery cover and tighten the retaining screw on the battery door.

Removing the Three AA Alkaline Batteries (Optional Accessory)

1.Turn the radio off.

2.With the back of the radio facing you, loosen the retaining screw on the battery door and open the cover.

3.Gently remove each alkaline battery by easing each battery out individually.

4.Close the battery cover and tighten the retaining screw on the battery door.

Notes

•Exercise care when removing NiMH or AA batteries. Do not use sharp or conductive tools to remove either of these batteries.

•Remove the batteries before storing your radio for extended periods of time. Batteries corrode over time and may cause permanent damage to your radio.

Using the mini-USB Charging Adaptor

The mini-USB charging adaptor allows you to conveniently charge your NiMH battery pack. This is an alternative to charging your NiMH battery pack in the Battery Charger desk stand using the AC wall adaptor and especially useful when used while traveling.

Available mini-USB charging options:

1.Vehicle charger

2.Mini-USB computer cable

If using a computer, the computer must be turned on.

This and other accessories (sold separately) are available for your radio. For more information, visit our Web site at motorolasolutions.com/talkabout or shop.giantintl.com.

1.Plug your mini-USB cable or charger into a power source as is appropriate for your accessory.

2.Plug the cable into the mini-USB port on the bottom of your radio.

3.After the initial charge, an empty battery will be fully charged in 7 hrs. for the MT350 series radio (KEBT-650 mAh NiMH battery pack) or 14 hrs. for the MT352 series radio (KEBT-1300 mAh NiMH battery pack).

4.The battery icon will scroll as the battery is being charged. The scrolling icon will stop when the battery is fully charged.

Notes

•When moving between hot and cold temperatures, do not charge the NiMH battery pack until the battery temperature acclimates (usually about 20 minutes).

•For optimal battery life, remove the radio from the charger within 16 hours. Do not store the radio while connected to the charger.

•If the radio is kept on while charging, the charging time will be extended.

•Even though the charger is connected, you may not be able

to transmit a message if the battery is completely empty .

Allow time for the battery to charge to 1 bar

before

attempting to transmit a message.

 

Attaching and Removing the Belt Clip

1.Attach belt clip to pocket or belt strap.

2.Align the belt clip post with the hole in the back of the radio.

3.Gently push until the clip clicks in place.

To Remove

1.Push down on the release tab at the top of the belt clip to release the catch.

2.Pull the belt clip away from the back of the radio.

Using the Desktop Battery Charger (Optional Accessory)

The battery charger provides drop-in charging convenience for NiMH batteries and can be placed on any flat surface, such as a desk or workbench. Charge the NiMH battery overnight (at least 16 hours) before using it for the first time.

MT350R Radio

After the initial charge, an empty battery (KEBT-650 mAh NiMH) is fully charged within 7 hrs.

MT352R Radio

After the initial charge, an empty battery (KEBT-1300 mAh NiMH) is fully charged within 14 hrs.

2

MT Series

 

Page 1 Page 3
Page 2
Image 2
Motorola MT350R, Kem-ml34301 technical specifications Licensing Information, Getting Started
Page 1 Page 3

Kem-ml34301, MT350R specifications

The Motorola MT350R and Kem-ML34301 are two notable models in the realm of two-way radios, offering impressive features that cater to outdoor enthusiasts and professionals alike.

The Motorola MT350R is a robust, feature-rich communication device designed for various applications, including hiking, camping, and event coordination. One of its key features is a 35-mile range, which ensures reliable communication over long distances. This capability is particularly useful for outdoor adventures where cellular service may be unreliable. The MT350R operates on 22 channels, with 121 privacy codes, allowing users to minimize interference from other radio users and maintain secure communication.

Durability is a hallmark of the MT350R, as it is designed to be water-resistant (IP54 rated) and withstand tough outdoor conditions. This makes it an excellent choice for users needing a reliable device while engaging in activities like kayaking or mountain climbing. Additionally, the device is equipped with a built-in flashlight, which is beneficial for nighttime use or emergencies.

The Kem-ML34301, on the other hand, is a versatile communication tool tailored for both professional and recreational use. It features an impressive range, typically up to 20 miles in open areas, making it suitable for large events or construction sites. One of its standout features is the ability to connect to a multitude of accessories, enhancing its usability and functionality.

This radio model offers multiple power settings, allowing users to extend battery life by adjusting the output power according to their needs. The Kem-ML34301 also incorporates a Voice Activation (VOX) feature, enabling hands-free operation, which is essential for professionals who require their hands for other tasks. Another advantage is its compact and lightweight design, making it easy to carry and deploy.

Both the Motorola MT350R and Kem-ML34301 showcase impressive battery life, often providing up to 12 hours of continuous use on a single charge. This is crucial for long trips or prolonged work hours, ensuring that users can rely on their devices when needed most.

In conclusion, the Motorola MT350R and Kem-ML34301 are powerful two-way radios that combine durability, long-range communication, and user-friendly features, making them top choices for anyone seeking dependable communication devices for outdoor activities or professional settings.
Top Page Image Contents