4. Service Features: The Basics 51
Service Features
Entering Text
In message fields that require you to enter text, you can
begin entering the text from the keypad when the field
is highlighted.
While entering text, press / to choose a text input
mode from the context-sensitive menu. (See “Entering
Text” on page 16.)
Message Size
You can create and send messages of up to 100 KB,
including attachments for MMS. The size of the
message appears at the top of the display as you are
creating the message.
Sending or Canceling
To send the message at any time after it has been
addressed:
䊳Press Send (left softkey) or press / > Send.
To cancel the message at any time:
䊳At the message screen, press Cancel (right softkey)
or press @ to cancel the message and save it in
Drafts.
Creating a Message
1. Press / > Messages > [Create Message].
2. Address the message:
䡲Select To. Enter the phone number or email
address from the keypad and press r. Repeat
this action to enter more phone numbers or email
addresses.
– or –
Press Search (left softkey) to select recipients from
Contacts or Recent Calls. Highlight recipient(s),
press r to select them (entries will be checked),
and then press Done (left softkey).
䡲If necessary, press Back (right softkey) to return
from the Send To screen to the main Message
screen.
Tip: You can also select [Create Message] from Inbox, Drafts,
or Outbox or begin messages from Contacts, Recent
Calls, Media Center, or standby mode, or by replying to a
message in your inbox.
Tip: To remove a phone number or email address from the list
of message recipients, highlight the phone number or
email address and press Remove (left softkey).