RECEIVER
Typical Performance Specifications
| VHF | UHF R1 | UHF R2 |
Frequency Range: | |||
Channel Spacing | 12.5/25 kHz | 12.5/25 kHz | 12.5/25 kHz |
Maximum Frequency Separation | Full Bandsplit | Full Bandsplit | Full Bandsplit |
Audio Output Power at Rated* | 500 mW | 500 mW | 500 mW |
Frequency Stability* |
|
|
|
±0.00025% | ±0.0002% | ±0.0002% | |
Analog Sensitivity* |
|
|
|
12 dB SINAD | .25 µV | .25 µV | .25 µV |
Selectivity* |
|
|
|
25 kHz chnl | |||
12.5 kHz chnl | |||
Intermodulation* | |||
Spurious Rejection* | |||
FM Hum and Noise* |
|
|
|
25 kHz | |||
12.5 kHz | |||
Audio Distortion* | 1% | 2.0% | 2.0% |
* Measured in the analog mode per TIA/EIA 603. Specifications subject to change without notice.
PORTABLE MILITARY STANDARDS 810 C, D, E & F
|
|
|
|
| ||||
| Method | Proc./Cat. | Method | Proc./Cat. | Method | Proc./Cat. | Method | Proc./Cat. |
Low Pressure | 500.1 | I | 500.2 | II | 500.3 | II | 500.4 | II |
High Temperature | 501.1 | I, II | 501.2 | I/A1, II/A1 | 501.3 | I/A1, II/A1 | 501.4 | I/Hot, II/Hot |
Low Temperature | 502.1 | I | 502.2 | I/C3, II/C1 | 502.3 | I/C3, II/C1 | 502.4 | I/C3, II/C1 |
Temperature Shock | 503.1 | I* | 503.2 | I/A1C3 | 503.3 | I/A1C3 | 503.4 | I |
Solar Radiation | 505.1 | II | 505.2 | I | 505.3 | I | 505.4 | I |
Rain | 506.1 | I, II | 506.2 | I, II | 506.3 | I, II | 506.4 | I, III |
Humidity | 507.1 | II | 507.2 | II | 507.3 | II | 507.4 | I* |
Salt Fog | 509.1 | I* | 509.2 | I* | 509.3 | I* | 509.4 | I* |
Blowing Dust | 510.1 | I | 510.2 | I | 510.3 | I | 510.4 | I |
Vibration | 514.2 | VIII/F, | 514.3 | I/10, II/3 | 514.4 | I/10, II/3 | 514.5 | I/24 |
Shock | 516.2 | I, II | 516.3 | I, IV | 516.4 | I/IV | 516.5 | I, IV |
* Military Standards specify a single procedure for this test.
11