8 | Wireless Cable Modem Gateway SBG900 |
B. Ethernet Connections
Computers using the Ethernet connection require an Ethernet adapter installed and a wired connection to the SBG900.
1If you purchased your Ethernet adapter separately, install the Ethernet
hardware and driver software according to the manufacturer's instructions. If your computer already has an Ethernet adapter installed, skip to step 2.
2Insert the SBG900 Installation
3Run the Installation Assistant. Choose Ethernet as your connection.
4Connect the SBG900 to the cable TV system as described in Section A.
5Plug one end of the Ethernet cable into the Ethernet port on the computer.
6Plug the other end into the ETHERNET port on the SBG900 or an Ethernet hub or switch connected to the SBG900, as shown in the illustrated sample Ethernet LAN.
The Installation Assistant tests the connection between the computer and the SBG900. This may take up to three minutes.
7Restart your computer to obtain an IP address. Follow the instructions in the SBG900 User Guide.
