Special Features
Interference Eliminator Code
Interference Eliminator Codes help minimize interference by providing you with a choice of code combinations.
To set the code for a channel:
1.Press \ until the code starts to flash.
2.Press ] or [ to select the code.
3.Press M to save the code setting.
You can set a different code for each channel using this procedure.
Note: You must set the Interference Eliminator Code to 0 on an FRS radio that uses Interference Eliminator Codes to communicate with other FRS radios that do not have Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a continuous warning tone and stops transmitting if you press M for 60 continuous seconds.
Special Features
21
