Motorola VT1000v warranty Installation With a Home Network, Not need to unplug it when not in use

Broadband

Modem

Router

LAN ports

Installation With A Home Network

1	Be sure your Motorola voice terminal is unplugged. Be sure power is off to your
	broadband modem (cable or DSL) and router.
2	Connect one end of an Ethernet cable (RJ-45) to an open Ethernet LAN port on
	your router. Follow the instructions provided with your router. Connect the other end
	of this Ethernet cable to the WAN connector on your Motorola voice terminal.
3	Connect a telephone to your LINE 1 connector using a phone wire (RJ-11). For a
	VT1005v only, you can connect a second telephone to the LINE 2 connector.
4	Power on your broadband modem, following the instructions provided with the

Computer

WAN

Motorola

voice

terminal

LINE 1 PC

Computer

Ethernet port

	modem. Wait about two minutes for it to boot.
5	Power on your router, following the instructions provided with the router. Wait about
	two minutes for it to boot.
6	Plug the AC power adapter to the POWER connector on your Motorola voice
	terminal and the electrical outlet. This turns your Motorola voice terminal on. You do
	not need to unplug it when not in use.

Phone		Computer
		(only if
		necessary)
	See “Connecting a Computer to
	Display the Configuration Pages”

7 Check that the POWER light on your Motorola voice terminal turns on solid green.

Wait about two minutes for the Motorola voice terminal to boot.

10