3 - 10 WT4070/90 Wearable Terminal User Guide
5. Connect the RS309 interface cable to the back of the RS309.
Figure 3-10
Connecting Interface Cable to RS309
6. Mount the RS309 on the RS309 glove. Refer to the RS309 Glove Installation Guide for information on
mounting the RS309.
7. Route the trigger cable around the side of the RS309, next to the index finger.
8. Slide the trigger mount on the index finger, with the button positioned next to the thumb, and adjust the
velcro strap.
Figure 3-11
RS309 on Back of Hand
After connecting the scanner, warm boot the wearable terminal. See Resetting the Weara ble Terminal on page
2-14 for information on performing a warm boot.
Interface Connector