Advanced Features
English
21
Sending an Emergency Alarm with Call
This feature allows you send an Emergency Alarm to another
radio. Upon acknowledgment, both radios can communicate
over a programmed Emergency channel.
Procedure:
1Press the programmed Emergency button.
2The LED lights up solid green. An Emergency Enter Tone
sounds at each retry.
3When an Emergency Alarm acknowledgment is received,
the Emergency Acknowledgment Tone sounds. The LED
blinks green.
4Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5Press the PTT button to make the call. The LED lights up
solid green.
6Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
7Release the PTT button to listen.
8Press the PTT button to respond.
9Long press the programmed Emergency button to exit the
Emergency mode.
If your radio is set to Silent, it will not have any audio or visual
indicators related to the Emergency feature, or receive any
response (call) from the target radio, until you press the PTT
button to initiate the call.
If your radio is set to Silent with Voice, it will not have any audio
or visual indicators related to the Emergency feature, or when
you are receiving a call from the target radio. The indicators will
only appear once you press the PTT button to initiate, or
respond to, the call.
NAG-LACR.book Page 21 Monday, October 26, 2009 3:03 PM