Moulinex BCB2, BCB4, BCB3, BCB1 manual Using your appliance for the first time

Models: BCB1 BCB3 BCB2 BCB4

1 12
Download 12 pages 53.36 Kb
Page 9
Image 9
APPLIANCES WITHOUT FITTED PLUG FITTING A PLUG - IMPORTANT

When the plug is a moulded type and this is cut off from the appliance, the connected wires are a shock hazard. Do not under any circumstances connect a cut off plug into the electrical socket outlet. The cut off plug must be disposed of in a safe manner that prevents any form of connection.

If the fuse cover is detachable, never use the plug with the cover omitted. Replacement covers can be obtained from your service agent.

Fit the appropriate plug according to the instruc- tions in paragraph “Fitting a plug”. With alterna- tive plugs a 15 amp fuse must be fitted either in the plug or adaptor or at the main fuse box.

APPLIANCES WITHOUT FITTED PLUG FITTING A PLUG - IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

GREEN & YELLOW

: EARTH

BLUE

: NEUTRAL

BROWN

: LIVE

As the colours in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN & YELLOW must be connected to the terminal in the plug which is marked with the letter ‘E’ or by the earth symbol or coloured green or green and yellow. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter ‘N’ or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter ‘L’ or coloured red.

This appliance is manufactured to conform to the Low Voltage Electrical Equipment (Safety) Regulations 1989 and is designed to comply with BS 3456. It complies with the requirements of the EEC Directive (89/336/EEC).

Any connection error will nullify the guarantee.

-This appliance is intended solely for domestic and indoor use.

-Unplug the appliance as soon as you have finished using it and when you clean it.

-Do not remove the plug from the socket by pulling on the cord.

-Do not put hot water in the reservoir.

-Do not use the appliance if it is not working properly or if it has been damaged. Any in- tervention apart from cleaning and normal maintenance by the customer must be carried out by an approved Moulinex ser- vice centre (see list in the service booklet).

-Do not place the appliance, the power cord or the plug in water or in any other liquid.

-Do not allow the power cord to hang down within reach of children.

-The power cord must never be close to or come into contact with the hot parts of your appliance, close to any source of heat or a sharp edge.

-Do not use the jug on a flame or an electric hot plate (all models).

-If the power cord or the plug are damaged, do not use the appliance. To avoid any risk these must be replaced by an approved Moulinex service centre (see list in the ser- vice booklet).

-For your own safety, use only the Moulinex accessories and spare parts which are suitable for your appliance.

-Always close the lid of the filter-holder (F) when using the coffee maker.

-Do not pour water into the appliance while it is still hot.

-Remember to replace the lid on the jug to ensure the drip-stop device functions, and to avoid overflow of the filter-holder.

-All appliances undergo strict quality controls. Practical use tests are conducted with appliances selected at random, which explains any signs of use.

Using your appliance for the first time

- Operate the coffee maker for the first time without ground coffee, with a full tank of water.

1 - Fill the tank (A), which is graduated in small and large cups, with cold water up the desired level.

2- Pour your ground coffee in a No. 4 filter paper placed in the removable filter-holder (E).

-Close the lid of the filter-holder (F). 3 - Place the jug (D) on the hotplate (C).

4 - Start the appliance using the switch (J): the indicator light will come on.

Notes:

-This coffee maker is fitted with a drip-stopdevice, allowing you to serve coffee before the water has finished running through. Re- place the jug quickly to avoid any overflow.

-The coffee maker automatically switches to keep-warm mode at the end of the cycle.

5- You can adjust the length of the cord by storing it under the appliance.

9

Page 9
Image 9
Moulinex BCB2, BCB4 Using your appliance for the first time, Appliances Without Fitted Plug Fitting A Plug - Important