Moultrie D50IR specifications SET Date and Time, Event Delay, Image Quality and Video

D50IR Manual 18-Mar-2010

MFH-DGS-D50IR

9

D50IR MODEL CAMERA
8.	POWER ON/OFF BUTTON	16. BATTERY COMPARTMENT
9.	FUNCTION SWITCHES	17. 12-VOLT EXTERNAL POWER
	• MODE (IR AIM, SETUP, AUTO)		PORT
	• DELAY (1, 5 , 10, 30 MINS)
			(This camera is compatible
	• RESOLUTION (VID, HI, LO)
			with the Moultrie Powerpanel
10. STATUS INDICATOR
			accessory to extend your
11. BATTERY INDICATOR
			battery life. Please visit our
12. SELECT BUTTON
13. CHANGE BUTTONS			website at
	(UP /DOWN )		www.moultriefeeders.com
14. ENTER BUTTON			for more information
15. SD MEMORY CARD SLOT
	9	8
				10
				11
				15
				14
				13
				12
				16
		17

NOTE: Product label is inside the carmera cover.

2

SET DATE AND TIME

In SETUP mode, the LCD will show the time. Press ENTER and the hour will ￿ash. Press Up() or Down() to select the proper hour, then press ENTER again and the minute will ￿ash. Press Up() or Down( ) to select the proper minute. Press ENTER again, AM or PM will ￿ash. Press Up() or Down() to select the Day and Night accordingly. Press ENTER to con￿rm the selections.

After setting up the time, press SELECT and the LCD will show the year. Press ENTER and the year will ￿ash. Press Up( ) or Down () to select the proper year and press ENTER again to con￿rm.

After setting up the year, press SELECT and the LCD will show the date. Press ENTER and the month will ￿ash. Press Up() or Down () to select the proper month, then press ENTER again and the day will ￿ash. Press Up() or Down() to select the proper day, then press ENTER again to con￿rm.

Press
AM10:30 “SELECT”	2009	131
Time	Year	Month & Date

EVENT DELAY

There are 4 different delay settings: 1 MIN., 5 MIN, 10 MIN. or 30 MIN.. Slide the DELAY SWITCH to the position of your selection. When the game camera is in AUTO mode, it will work according to your selected event delay.

IMAGE QUALITY AND VIDEO

There are 3 different capture settings: Video (VID), High (HI) and Low (Lo). Please refer to the section 7 MEMORY – STORAGE/CAPCITY for the description of each setting. Slide the RESOLUTION SWITCH to the position of your selection. When the game camera is in AUTO mode, it will work according to your selected capture setting.

7 4

Your camera supports external SD memory card ONLY (NO internal	ON/OFF button
	Turn the unit ON or OFF. To turn ON you must press and hold the
memory available). The LCD shows “0000” if NO SD memory card
	ON/OFF button until the LCD display activates.
is inserted in AUTO mode. The camera cannot capture without

external memory.	MODE SWITCH
	Depending on the position of the switch,
Please inserts a SD memory card.	there are 3 possible functions: IR AIM,
	SETUP and AUTO.

	EVENT DELAY SWITCH
	Depending on the position of the switch,
	there are 4 event delay time can be set: 1
	min, 5mins, 10mins and 30mins.
	RESOLUTION SWITCH
	Depending on the position of the switch, there is one video option:
	VID and two images resolution options: HI and LO
	UP( ) OR DOWN ( ) BUTTON
	Used to change the settings within the
	SETUP mode.
	SELECT BUTTON
	Make selections in SETUP mode.
D50IR MODEL CAMERA	ENTER BUTTON
	Con￿rm the selection in SETUP mode.
	SD MEMORY CARD PORT
	Insert SD card for memory with the metal
	contact facing down. A SD card is required in order for the camera to
	capture images/videos.
	STATUS INDICATOR
	To indicate a motion is detected in IR AIM	STATUS
	mode.
	BATTERY INDICATOR	BATTERY
	-To indicate the batteries are low, please
	replace batteries with fresh batteries.

1 10

Unlock the two latches to open the camera cover.

Insert 4 fresh C Cell alkaline batteries into the battery compartment. Place the batteries so the positive (+) and negative (-) polarities are lined up correctly as indicated in the battery compartment.

Close the camera cover. When the battery indicator turns “Green”, replace the batteries with fresh C cell alkaline batteries.

2

TURN POWER ON AND OFF

Open the camera cover. Slide the MODE switch to the SETUP position. Press and hold the ON/OFF button until the time appear on the LCD display. If you want to turn the unit off, simply press the ON/OFF button again. The LCD shows “OFF” and then goes off. NOTE: If there is no activity for 2 minutes, the camera will automatically shut off to conserve battery life.

4

SETUP MODE

To change digital camera settings, the MODE switch has to be in the SETUP position.

AUTO MODE

Turn the MODE switch to the AUTO position, press and hold the ON/OFF button to switch on the camera. In the AUTO mode, the LCD display shows the time(Fig1) and then counts down for 10 sec(Fig2). The LCD goes off and the camera is STANDBY for capturing.

If a motion is detected, the camera will wake up and show the time(Fig3). While a picture or video clip is capturing, the LCD shows “SNAP”. After the capturing process is ￿nished, it will show the number of pictures or video clips remain(Fig4). Then the camera will be in STANDBY mode again.

		Motion detected &
		Capture picture
AM 10:30	10		AM 10:30	0231
Fig1 Shows Time	Fig2 Count down		Fig3 Shows Time	Fig4 NO. of Pictures
	10 sec			remain

MEMORY FULL

In the AUTO mode, if the LCD shows “0000”, it means that the memory is full. The camera will shut off automatically to save battery life. Please insert an empty SD memory card for memory space.

LOW BATTERY

If the BATTERY indicator turns green, it means that the battery is low. Please replace batteries with fresh batteries.

5

MOUNTING CAMERA

Use the mounting strap included to mount the camera securely in the desired location.

6

INFRARED (IR) AIM

The camera can be aimed using the infrared detection system. Slide the MODE switch to IR AIM position.

Press and hold the ON/OFF button until “Ir” is displayed on the LCD panel.

The IR aiming mode is now active. Wave your hand in front of the camera. The STATUS light will turn red every time motion is detected. Find your desired target.

Note: The camera will shut down automatically after 2 minutes to save battery life.

3

GENERAL OPERATION

1.Automatic AUTO mode records images/videos using infrared detection. ALWAYS LEAVE THE MODE SWITCH IN THE AUTO MODE OR THE CAMERA WILL NOT OPERATE.

2.Setup SETUP mode for setting up Date and Time as described in previous section.

3.IR Aim IR AIM mode for helping you to aim the camera towards the object. Please consult the section 6. OPERTAION – AIMING for detail description.

NOTE: When left inactive for more than 2 minutes in SETUP and IR AIM mode, the camera will automatically shutdown. The camera will need to be restarted to resume operation in SETUP and IR AIM mode.

8CAMERA – SPECIFICATIONS

Operational Modes:	Auto – Automatic operation
	Setup – Set Date and Time
Video:	IR Aim – Infra Red Aiming object
	10 seconds AVI clips
Picture Resolution (pixels):	LO/HI
Format:	(See Section7, Memory • Storage / Capacity)
	JPEG – still images and AVI – video clips
Max. External SD Memory:	UP to 16GB (optional)
Infrared Sensor:	Passive, activated when motion is detected
Infrared Sensor Range:	30 ft. / 22° width
Flash:	IR LEDs
Flash Range:	5 ft. - 30 ft.
Image Output:	Record in SD card
Event Delay:	1 MIN., 5 MIN, 10 MIN. or 30 MIN.
LCD Display Panel:	Displays Date/Time Setup and Images/
Power Supply:	Videos Count
	4 Alkaline C Cells batteries
Duty Cycle:	30 days average with 4-C Cell batteries
Adjustable mounting:	Mounting Strap

9

4 5 1 2 3

D50IR MODEL CAMERA

1.	IR LEDs
2.	CAMERA LENS
	(COLOR SENSOR)
3.	CAMERA LENS	6
	(BLACK & WHITE SENSOR)

4.PIR SENSOR

5.LCD STATUS DISPLAY

6.	LOCKABLE LATCHES		6
7.	WEATHER-RESISTANT CASE
		7