FAULT FINDING
PROBLEM | SOLUTION | |
|
| |
Engine will not start | Check there is ample clean, fresh fuel in the tank. | |
| ||
Check the cutter blade is not fouling the ground preventing free rotation. | ||
| ||
|
| |
Engine will not stop | Check the Operators Presence Control (OPC) lever is fully released. | |
| ||
Remove spark plug lead to stop engine using insulated gloves and refer to dealer. | ||
| ||
|
| |
| Stop the engine and disconnect the spark plug lead using heat resistant gloves. | |
Failure to cut grass properly |
| |
Check blade attachment bolt is tight. | ||
|
| |
| Check condition of blade. If seriously worn or damaged replace with a new one. | |
|
| |
| Stop the engine and disconnect the spark plug lead using heat resistant gloves. | |
|
| |
| Check and make sure there is no build up of grass inside the casing. | |
|
| |
| Check grass catcher is allowing air to flow through the fabric; if it is clogged it should be washed | |
Failure to collect grass properly | carefully. | |
| If the grass catcher is not clogged raise the height of cut to increase airflow. | |
|
| |
| Check to ensure the engine is running at the correct speed, (approximately 3000rpm). | |
|
| |
| If conditions are too severe to use the grass catcher, remove it and work with the deflector in position. | |
|
| |
Machine vibrates excessively | This will certainly indicate that the blade has become badly damaged. Stop the engine, disconnect the | |
spark plug lead and examine the blade assembly. Refer to your local dealer. | ||
|
CERTIFICATE OF CONFORMITY
EC DECLARATION OF CONFORMITY
The company | GGP ITALY SPA - Via del Lavoro, 6 | ||
|
| 31033 Castelfranco V.to (TV) ITALY | |
Certify that the lawnmower, walk behind with | HP474 type ESL 464 | ||
combustion engine | SP474 type ESL 464 TR | ||
Widht of cut | 45 cm |
| |
Engine | SUMEC • M 150 | ||
Tested by | SNCH, 11 route de Luxembourg | ||
Conforms to the specifications of directives | |||
98/37/EEC |
| ||
|
| 89/336/EEC ~ 2004/108/EC - 2000/14/EC | |
Conformity assessment procedure followed | ANNEX VI |
| |
Measured sound power level | 95 dB(A) |
| |
Guaranteed sound power level | 96 dB(A) |
| |
Reference to harmonised standards | EN 836 - EN | ||
Sound pressure level at the ear measured in compli- | EN ISO 14982 |
| |
85 dB(A) |
| ||
ance with 81/1051/EEC |
| ||
Viration level at the handle (EN 1033) | 6 m/s2 |
| |
|
|
| |
Castelfranco Veneto (TV) - ITALY | S. Ferrari (General Manager) | ||
