Moxa Technologies CP-104UL user manual Installation Guide

Introduction

Installation Guide

This section gives a brief summary of how to install the Smartio CP-104UL board under each supported operating system. The installation is simple and involves the following stages:

Check the PCI BIOS settings. Install the Smartio CP-104UL board.

See Chapter 2, “Hardware

Installation.”

↓

Install the software from the diskette. Configure the driver for the board and ports.

↓

Connect the devices with the cable.

See the respective OS section in Chapter 3, “Software Installation.”

See Chapter 5, “Connection Cables and Cable Wiring,” for cable wiring.

↓

Restart the system.

Check the driver initialization status.

If the system restarts successfully, you may develop your applications or execute the desired applications.

See Chapter 3, “Software Installation,” for board init. status.

See Chapter 4, “Serial Programming Tools.”

Smartio CP-104UL User’s Manual 1-5