Moxa Technologies V2101 manual Hardware Specifications, Embedded Computing Solutions

Embedded Computing Solutions

Hardware Specifications

Computer

CPU: Intel Atom Z510PT 1.1 GHz processor

OS (pre-installed):Linux, Windows CE 6.0 or Windows Embedded Standard 2009

System Chipset: Intel® US15WPT

BIOS: 4 Mbit Flash BIOS, PLCC type, ACPI function supported

FSB: 400/533 MHz

System Memory: 1 x 200-pin DDR2 SODIMM socket support DDR2 400/533 up to 2GB max, 1 GB built-in

USB: USB 2.0 compliant hosts x 4, type A connector, supports system boot up

Storage

Built-in:2 GB CompactFlash to store OS

Storage Expansion: SD socket for storage expansion

Other Peripherals

Audio: AC97 audio, with line-in/out interface

Display

Graphics Controller: Intel® Graphics Media Accelerator, 500 Graphics, for 2D and 3D graphics

Video: The Poulsbo XL SCH supports full hardware acceleration of video decode standards such as H.264, MPEG2, MPEG4, and WMV9.

SDVO: Chrontel CH7317 CRT (1280 x 1024 @ 85 Hz)

CRT Interface: CRT Interface for VGA output (DB15 female connector)

LVDS Interface: 18-bit or 24-bit single channel LVDS (1366 x 768 @ 85 Hz)

Ethernet Interface

LAN: 2 auto-sensing 10/100/1000 Mbps ports (RJ45)

Serial Interface

Serial Standards: 2 RS-232/422/485 ports, software selectable (DB9 male)

ESD protection: 2 KV for all signals

Serial Communication Parameters

Data Bits: 5, 6, 7, 8

Stop Bits: 1, 1.5, 2

Parity: None, Even, Odd, Space, Mark

Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485

Baudrate: 50 bps to 115.2 Kbps

Serial Signals

RS-232:TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422:TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w:TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w:Data+, Data-, GND

Digital Output

Output Channels: 3, sink type

Output Current: Max. 200 mA per channel

Output Voltage:

•Logic 0: 0-0.55 V

•Logic 1: 2.5-3.3 V

On-state Voltage: 24 VDC nominal, open collector to 30 V

Connector Type: DB9 female

LEDs

System: Power, Storage

LAN: 100M/Link x 2, 1000M/Link x 2 (on connector)

Switches and Buttons

Power Switch: on/off (side)

Reset Button: For warm reboot (front side)

Physical Characteristics

Housing: Aluminum

Weight: 940 g

Dimensions:

Without ears: 150 x 49 x 126 mm (5.91 x 19.30 x 4.96 in)

With ears: 178 x 52 x 125 mm (7.01 x 2.05 x 49.21 in)

Mounting: DIN-Rail, wall, VESA

Environmental Limits

Operating Temperature: -40 to 85°C (-40 to 185°F)

Operating Humidity: 5 to 95% RH

Storage Temperature: -40 to 85°C (-40 to 185°F)

Anti-vibration:2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis

Anti-shock:20 g @ IEC-68-2-27, half sine wave, 11 ms

Power Requirements

Input Voltage: 9 to 36 VDC (3-pin terminal block for V+, V-, SG)

Power Consumption: (without connecting LVDS panel) With no load on 4 USB ports:

•1.88 A @ 9 VDC, 17 W

•583 mA @ 24 VDC 14 W

•422 mA @ 36 VDC 15 W With full load on 4 USB ports:

•3 A @ 9 VDC, 27 W

•1 A @ 24 VDC, 24 W

•700 mA @ 36 VDC, 25.2 W

Regulatory Approvals

EMC: CE (EN 55022 Class A, EN 61000-3-2 Class D, EN 61000-3-3, EN 55024), FCC (Part 15 Subpart B, CISPR 22 Class A, ANSI C63.4)

Safety: UL/cUL (UL 60950-1, CSA C22.2 No. 60950-1-07), LVD (EN 60950-1), CCC

Green Product: RoHS, cRoHS, WEEE

Digital Input

Input Channels: 3, source type

Input Voltage: 0 to 30 VDC at 5 KHz

Digital Input Levels for Dry Contacts:

•Logic level 0: Close to GND

•Logic level 1: Open

Digital Input Levels for Wet Contacts:

•Logic level 0: +3 V max.

•Logic level 1: +10 V to +30 V (COM to DI)

Connector Type: DB9 female

Reliability

Automatic Reboot Trigger: Built-in WDT (watchdog timer) supporting 1-255 level time interval system reset, software programmable

Warranty

Warranty Period: 3 years

Details: See www.moxa.com/warranty

Note: The Hardware Specifications apply to the embedded computer unit itself, but not to accessories. In particular, the wide temperature specification does not apply to accessories such as the power adaptor and cables.

2

w w w. m o x a . c o m i n f o @ m o x a . c o m