align the K-Cup®Pack Holder with the opening using the two front ribs as a guide, and snap into place from the top.

2. Cleaning the Funnel – The Funnel

 

can be removed from the K-Cup®

 

Pack Holder by pulling on it until

 

it snaps off (fig. 1). The Funnel is

 

dishwasher safe. To replace it, just

 

snap it back onto the K-Cup®Pack

!

Holder Assembly.

3 Cleaning the Exit Needle – The Exit

 

Needle is located on the inside

 

bottom of the K-Cup®Pack Holder

 

Assembly. Should a clog arise

 

due to coffee grinds, it can be

 

cleaned using a clean household

 

tool. Remove K-Cup®Pack Holder

FIGURE 1

assembly and detach Funnel. Insert

the household tool into the Needle

to loosen the clog and push it out. The K-Cup®Pack Holder is dishwasher safe.

CAUTION:There are sharp needles that puncture the K-Cup®Pack above the K-Cup®Pack Holder and in

the bottom of the K-Cup®Pack Holder. To avoid risk of injury, do not put your fingers in the K-Cup®Pack Assembly Housing.

NOTE: Over time, discoloration, spotting or staining may appear in the Hot Water Tank. This is normal and will vary depending on the mineral content of the bottled or filtered water used in the Brewer and will not affect the operation of the Brewer.

Cleaning the Hot Water Tank

To access the Hot Water Tank, press the Water Marking Button and the Water Fill Lid will pop open. Inspect the Hot Water Tank area and clean with a damp lint free cloth as necessary. Close the Water Fill Lid when finished.

12

BVMC-KG2_11ESM1.indd 13-14

Emptying the Hot Water Tank

1. Ensure that the Water Fill Lid is closed.

2. Place a cup on the Drip Plate then press and hold the BREW Button until all the water has been dispensed. Note, there will be a delay of 4-5 seconds until water starts

to dispense.

Storage

Empty the Hot Water Tank before storing and take care to ensure that you store your Brewer in a safe and frost free environment. It is suggested to store your Brewer in the upright position. If you store the Brewer in a cold environment, you run the risk of condensation freezing inside the Brewer and causing damage. When you prepare to use it after storage, we recommend wiping the Hot Water Tank with a damp lint-free cloth and running three cleansing brews without a K-Cup®Pack. If your Brewer has been in an environment below freezing, please be sure to let it warm to room temperature for 2 hours before using.

De-Scaling Your Brewer

Mineral content in bottled or filtered water varies. Depending on the mineral content of the water, calcium deposits or scale may build up in your Brewer. Scale is non-toxic but left unattended, it can hinder Brewer performance. Descaling your Brewer helps maintain the heating element, and other internal parts of the Brewer that come in contact with water. The Brewer should be de-scaled every 3-6 months to ensure optimal performance or when there are white deposits in the Hot Water Tank. It is possible for calcium deposits to build up faster, making it necessary to de-scale more often.

Step 1: Make sure you have at least 8 ounces of undiluted white vinegar on hand. You will also need a 10 oz ceramic mug (do not use a paper cup) and access to a sink.

Step 2: Fill Hot Water Tank with 8 ounces of undiluted white vinegar up to the FILL LEVEL mark, place a ceramic mug on the Drip Tray Plate.

13

2/1/12 2:50 PM

Page 6 Page 8
Page 7
Image 7
Mr. Coffee BVMC-KG2 manual Cleaning the Hot Water Tank, Emptying the Hot Water Tank, Storage, De-Scaling Your Brewer
Page 6 Page 8

BVMC-KG2 specifications

Mr. Coffee BVMC-KG2 is a versatile coffee maker designed for both convenience and performance, making it a popular choice among coffee enthusiasts. This model boasts a range of features and technologies that cater to the modern coffee drinker while ensuring a delightful brewing experience.

One of the standout features of the Mr. Coffee BVMC-KG2 is its single-serve capability. This means users can brew a single cup of coffee at a time, eliminating the waste often associated with full pots of coffee. This feature not only saves time but also allows for a variety of flavors, giving users the flexibility to choose their preferred coffee blend, whether they prefer bold, medium, or light roasts.

The BVMC-KG2 is compatible with K-Cup pods, allowing a wide selection of coffee types and brands. With this design, users can easily switch between flavors and enjoy a fresh cup of coffee anytime without the need for extensive cleanup. The brewing process is straightforward, featuring a simple brew button that takes users through each step with ease.

Another significant technology integrated into the Mr. Coffee BVMC-KG2 is the brew basket, which is not only easy to fill but also designed to accommodate larger travel mugs. This feature proves to be beneficial for those who prefer to drink their coffee on the go. Additionally, the removable drip tray helps to maintain cleanliness by catching spills and drips, making it user-friendly.

Temperature control is another notable characteristic of the BVMC-KG2. The coffee maker brews coffee at an optimal temperature, ensuring that each cup is brewed to perfection, maximizing flavor and aroma extraction. The quick brewing time is a significant advantage, making it an excellent option for busy mornings when every minute counts.

The sleek design of the Mr. Coffee BVMC-KG2 enhances its appeal, fitting seamlessly into any kitchen decor. Its compact size ensures that it doesn’t take up too much counter space while still delivering powerful performance. Ultimately, the Mr. Coffee BVMC-KG2 stands out in the realm of single-serve coffee makers, offering functionality, flexibility, and a quality brewing experience that caters to diverse coffee preferences. With its user-friendly features and efficient brewing capabilities, it is an ideal companion for coffee lovers looking for convenience and quality in their daily caffeine fix.
Top Page Image Contents